Triumph NTC-950-2 Tire Changer and NTB-550 Wheel Balancer Combo

See more by Triumph

$4,450.00 - $5,250.00

$4,450.00

$4,450.00 - $5,250.00

$4,450.00

In stock

SKU Combo NTC-950-2/NTB-550

Delivery Option: Warehouse Pickup

Pick up at a Triumph warehouse

Quantity

Product Overview

In short

The Triumph NTC-950-2 / NTB-550 combo pairs a dual-assist-arm tire changer with a computer wheel balancer so one bay can mount, demount, and balance passenger and light-truck wheels start to finish. Both machines run on 110V, so the combo drops into most shops without new electrical service.

What you get in the combo

This package covers the full tire job in a single bay: the NTC-950-2 tire changer handles mounting and demounting, and the NTB-550 wheel balancer finishes the wheel before it goes back on the vehicle. The changer ships with a steel mount and demount head, a plastic mount and demount head, plastic wheel clamp covers, a soap tank with application brush, and a tire tool bar. The balancer includes a plastic safety hood, quick-release wing nut, cone adapters, a wheel weight hammer, and a rim caliper. Both machines run on 110V power, so a shop adding tire service does not need a new circuit or a three-phase drop to put the pair to work.

Tire changer capability and clamping range

The NTC-950-2 uses dual pneumatic assist arms that hold the bead and support the tire through the mount and demount cycle, which is what makes wide-profile, low-profile, and run-flat tires manageable without wrestling them by hand. A side-mounted bead breaker applies 5,500 lbs of force to separate stubborn beads, and the bead blast system fires a burst of air into the sidewall to help break and seat beads. The turntable clamps 16"–28" from the inside and 14"–26" from the outside, taking wheel widths up to 15" and tire diameters up to 43". A 1.5 HP motor and a 120 PSI maximum air supply drive it through high-volume work.

Balancer accuracy and operation

The NTB-550 reads imbalance to ±1 gram and completes a spin cycle in 6–9 seconds, so it keeps pace with a busy changer rather than becoming the bottleneck. A wheel brake holds the assembly still while you place weights, which keeps each correction where you put it. The display switches between standard and metric units. Note that the balancer uses manual data entry — there is no automatic data entry, so you measure and enter rim width, diameter, and offset before each spin using the included rim caliper. It accepts wheels from 10" to 28" with rim widths of 1.5" to 20", tire diameters up to 44", a 36 mm shaft, and a 150 lb maximum wheel weight, driven by a 1/4 HP motor.

Wheels it services and wheels it does not

Per the Triumph fitment guide, the NTC-950-2 services passenger cars and 1/2-, 3/4-, and 1-ton truck wheels, Load Range C, D, and E tires, wheels from 14" to 24" plus 16.5", and run-flat tires. It does not service box-truck, over-the-road-truck, 19.5", 21.5", or implement wheels, and motorcycle wheels require an additional adapter. The NTB-550 covers the same passenger and light-truck range and handles run-flats, with a 75 lb total-weight limit on Load Range C–E and larger wheels; motorcycle wheels also require an adapter there. If your work includes medium-duty or 19.5" commercial wheels, this pair is not the right fit — check the fitment guide against the wheels you actually see.

Key features

Dual pneumatic assist arms — hold the bead and support the tire through mount and demount, making wide-profile, low-profile, and run-flat tires easier to handle.
Bead blast system — shoots a strong burst of air into the sidewall to help break and seat beads.
5,500 lb bead breaker — side-mounted, applies 5,500 lbs of force to separate beads from the rim.
Wide clamping range — clamps 16"–28" inside and 14"–26" outside, handling wheel widths up to 15" and tire diameters up to 43".
1.5 HP changer motor — runs on a 120 PSI air supply for high-volume work.
±1 gram balancing — the NTB-550 finishes a spin cycle in 6–9 seconds with a wheel brake that holds the assembly steady during weight placement.
110V on both machines — no special electrical service required in most shops.

Specification Table

Combo NTC-950-2/NTB-550 · TriumphSKU Combo NTC-950-2/NTB-550
Tire changer — inside clamping	16"–28"
Tire changer — outside clamping	14"–26"
Tire changer — max wheel width	15"
Tire changer — max tire diameter	43"
Tire changer — bead breaker force	5,500 lbs
Tire changer — bead blast	Yes
Tire changer — motor	1.5 HP
Tire changer — max air pressure	120 PSI
Tire changer — voltage	110V
Tire changer — assembled size	56" x 93" x 80"
Tire changer — shipping size	38" x 65" x 51"
Tire changer — shipping weight	900 lbs
Balancer — wheel size	10"–28"
Balancer — max tire diameter	44"
Balancer — rim width	1.5"–20"
Balancer — max wheel weight	150 lbs
Balancer — shaft size	36 mm
Balancer — balancing accuracy	±1 gram
Balancer — cycle time	6–9 sec
Balancer — automatic data entry	No
Balancer — display	Standard or Metric
Balancer — motor	1/4 HP
Balancer — voltage	110V
Balancer — assembled size	28" x 47" x 56"
Balancer — shipping weight	325 lbs

Compare models

	NTC-950-2 / NTB-550 Tire Changer + Balancer Combo THIS	NTC-950 / NTB-800 Tire Changer and Balancer Combo	NTC-650 Heavy-Duty Truck Tire Changer	NTC-650 / NTB-1200 Truck Tire Changer & Balancer Combo
Changer clamping range	16"–28" inside / 14"–26" outside	16" - 28" inside, 14" - 26" outside	14"–26"	14" - 26"
Changer max tire diameter	43"	43"	63"	63"
Bead breaker force	5,500 lbs	5,500 lbs	30.5"	30.5"
Assist arms / bead blast	Dual pneumatic assist arms; bead blast: Yes	10" - 28"	120 PSI	10" - 28"
Price	$4,450.00	$3,765.00	$5,995.00	$8,800.00
	Viewing	Check ›	Check ›	Check ›

Specs from Triumph manuals. Prices update live and reflect current promotions.

FAQ about this model

What power does the combo need?
Both machines run on standard 110V power, so no special electrical service is required in most shops.

How much air pressure does the tire changer need?
The NTC-950-2 is rated to a maximum of 120 PSI and is driven by a 1.5 HP motor. The dual assist arms and bead blast system are pneumatic, so a shop air supply is required.

What size wheels fit the changer and the balancer?
The NTC-950-2 clamps wheels from 16" to 28" inside and 14" to 26" outside, up to a 15" width and a 43" tire diameter. The NTB-550 balances wheels from 10" to 28" with rim widths of 1.5" to 20" and tire diameters up to 44".

Can it handle run-flat and low-profile tires?
Yes. The dual pneumatic assist arms and bead blast system are built to manage run-flat, low-profile, and wide-profile tires, and run-flat wheels are listed as compatible with the NTC-950-2 in the Triumph fitment guide.

Does the balancer enter wheel data automatically?
No. The NTB-550 uses manual data entry, so you enter the wheel parameters before each spin. A rim caliper is included for measuring.

How much floor space does the pair take?
Assembled, the NTC-950-2 measures 56" x 93" x 80" and the NTB-550 measures 28" x 47" x 56". Shipping weights are 900 lbs for the changer and 325 lbs for the balancer.

Will it service medium-duty or 19.5" truck wheels?
No. Per the Triumph fitment guide, the NTC-950-2 does not service box-truck, over-the-road-truck, 19.5", 21.5", or implement wheels. It covers passenger cars and 1/2-, 3/4-, and 1-ton truck wheels in Load Range C, D, and E.

What's included with each machine?
The tire changer comes with a steel mount and demount head, a plastic mount and demount head, plastic wheel clamp covers, a soap tank with application brush, and a tire tool bar. The balancer includes a plastic safety hood, quick-release wing nut, cone adapters, a wheel weight hammer, and a rim caliper.

How does the combo ship?
It ships as freight on an LTL common carrier with lift gate service. The driver lowers each machine to the ground at the rear of the truck but does not move equipment into your shop or assemble it. Freight-terminal pickup is available if you prefer to collect the order, and you schedule the delivery appointment with the carrier.

Shipping & Returns

We offer standard 1-5 business day shipping (following dispatch) via LTL Freight, FedEx, UPS, DHL, or USPS. Orders typically process in 1-2 business days (starting the following business day). Shipping rates are usually calculated at checkout; however, we reserve the right to provide custom shipping quotes for oversized or specialized equipment.

60-DAY NO-HASSLE REFUNDS AND RETURNS

If there’s an issue with your product, we make refunds and returns quick and easy.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused or unused, with tags, and in its original packaging. To contact us, email info@vovlift.com

More information on shipping and returns can be found here.

Warranty

Triumph Limited Warranty. Triumph covers parts and product defects for one (1) year; labor is not included. Hydraulic cylinders carry a 30-day full warranty, after which a seal kit is supplied for cylinder service. Rubber lifting pads are not covered. The warranty applies to the original purchaser with proof of purchase.

FAQ

How long will it take for my order to ship? When will I receive it?
Most orders are processed within 1-2 business days, starting the business day following the date the order was placed. Once dispatched, standard shipping typically takes an additional 1-5 business days (starting the business day after shipment).

In total, you can generally expect your order to arrive within 2-7 business days. Please note that larger equipment, oversized items, or specialized products may require additional handling and transit time.

Read more about our Shipping Policy.

Which payment methods do you accept?
We are committed to ensuring a safe shopping experience on our Website. We place the highest value on your privacy and security.

We accept all major credit cards and payments made via Visa, Mastercard, American Express, Discover, Diners Club, Shop Pay, Apple Pay, Google Pay, Meta Pay, and PayPal.

What is your return policy?
Vovlift accepts returns within 60 days from the delivery date. To be eligible for a return, your item must be unused, in the same condition that you received it, and in its original packaging. Please include the original order confirmation or packing slip when returning an item.

Please read our Return Policy.

What if my product is damaged?
If you receive a damaged or defective item, please contact us immediately at info@vovlift.com with details and photos of the issue. We will work to resolve the problem promptly.

How do I place an order?
To place an order online, simply click “Add To Cart” on your preferred product and proceed to checkout. Enter your shipping and billing information and complete checkout.

How do I know when my order will ship?
Once you place your order, you will receive a confirmation email confirmation credit card authorization and shipping/billing information.

We will immediately process your order and you will receive an email confirming your order has shipped with a tracking number once it leaves the warehouse.

If an item goes out of stock, you will be notified via email or phone within one business day. We take great measures to ensure all products listed on our website are in stock, but often times items can quickly sell out due to high demand.

Will you send an order confirmation via e-mail?
An order confirmation message will be sent to the e-mail address you provide us for each order you submit. We recommend that you print and save the e-mail confirmation for your records. Please be sure to enter your e-mail address correctly to ensure that you receive your order confirmation.

Can I change my order?
Yes, you can change your order at no cost by simply emailing us at info@vovlift.com.

TRIUMPHAutomotive Shop Equipment

Shop Equipment That Earns Its Floor Space

Triumph builds the machines a working bay actually runs on: two-post and four-post vehicle lifts from 7,000 to 50,000 lb, truck and passenger tire changers, wheel balancers, rolling bridge jacks, shop presses and oil drains.

The lifts are manufactured to ISO 9001 quality standards and are CE certified. Every machine ships with a one-year parts warranty, and you can pick your order up yourself at one of three US warehouses instead of paying freight.

View our Triumph Equipment Collection

Certified Build

Manufactured to ISO 9001 quality standards and CE certified — not a claim, a certification.

High-Performance Design
Rigorous Testing Process
Advanced Technical Solutions

Capacity For Any Bay

From a 7,000 lb portable two-post to a 50,000 lb four-post — passenger cars through heavy trucks.

Reinforced Steel Carriages
Industrial-Strength Components
Handles Daily Shop Abuse

Pick Up Or Ship

Collect at Columbus OH, Fort Worth TX or North Las Vegas NV and skip the freight cost.

Strategic US Distribution Hubs
Rapid Delivery Nationwide
Expert Support in the USA

One-Year Parts Warranty

Parts and defects covered for a full year, with a seal kit supplied for cylinder service after 30 days.

Strict Quality-Control Process
Professional-Grade Standards
Unbeatable Value & Performance

Excellent

Based on 27 reviews

Trustpilot

5 stars as always

5 stars as always. Our school used this store again and once again everything went great.

Joann Alford, December 17, 2024

We ordered Makinex dual pressure…

We ordered Makinex dual pressure cleaner and Movexx electric tug. Everything came fast in great condition. We will back.

Ronald Jones, December 17, 2024

I recived package than expect

I recived package than expect. Good store.

Jacob Hollingsworth, December 5, 2024

Second purchase and excellent service

Second purchase and excellent service. Highly recommend.

Allen Martin, December 16, 2024

I’m very impressed with the quality and…

I’m very impressed with the quality and reliability of the equipment. Highly recommend Vovlift for anyone in need of industrial machinery!

James Jones, October 10, 2024

Everything was good

Everything was good, only 4 stars because I recived wrong model but everything go fixed fast.

Max Halsted, October 10, 2024

If you are looking Apollolift products…

If you are looking Apollolift products in good price, this is right place. 5 stars.

Dan Friddle, August 21, 2024