Do all mini skid steers use the same attachments?

No. Mini skid steer mounting plates vary by manufacturer and often by model, unlike the standardized full-size skid steer quick-attach. These Loflin fork frames are stocked with Toro Dingo and Bobcat MT50 mounts, and additional custom mounts are available on request. Measure your machine's mount plate or confirm your model with us before ordering rather than assuming it will bolt up.

Do mini skid steer attachments work on a full-size skid steer?

Generally no. Full-size skid loaders use a larger quick-attach plate and carry far more weight, so a mini attachment neither fits the interface nor matches the machine's capacity. The Loflin frames listed here are built for mini machines and ship with Toro Dingo or Bobcat MT50 mounts. Pallet forks for a full-size skid steer are a separate attachment class entirely.

What is the 70/30 rule for skid steers?

It is shop-floor shorthand rather than a published standard, and you will hear it defined several ways, none of them from a standards body. Do not size a load with it. Use the rated operating capacity in your loader's operator's manual, which the manufacturer derives from that machine's tipping load, and keep the load center as close to the mount as the pallet allows.

What are the best attachments for a mini skid steer?

That depends on the work, but pallet forks are usually the first attachment after the bucket, because they turn the machine into a yard forklift for pallets, bundled material and crates. This collection carries one option, the Loflin Fabrication Mini Skid Steer Fork Frames at $750 in 36", 42" and 48" fork lengths. Other attachment types are outside what this page covers.

Can I use these as a fork attachment for a mini excavator?

Not as stocked. These frames ship with Toro Dingo and Bobcat MT50 loader mounts, while a mini excavator connects through a quick coupler or pin-on arrangement instead. Loflin does offer additional custom mounts, so contact us with your machine model and coupler type before ordering to find out whether an excavator mount is workable for your setup.

Mini Skid Steer Pallet Forks for Enhanced Material Handling

Looking for pallet forks for a skid steer in the mini class? This collection carries one attachment: the Loflin Fabrication Mini Skid Steer Fork Frames at $750, built from 1 3/8" thick forged alloy steel with a 4" wide frame, a 1/4" plate fork guard and a CNC-machined carriage bar. Fork lengths are 36", 42" and 48", with Toro Dingo and Bobcat MT50 mounts stocked.

Sort by

View as

Loflin Fabrication Mini Skid Steer Fork Frames

$750.00 - $770.00

$750.00

$750.00 - $770.00

$750.00

Available to order

Buy Now, Pay Later

Loflin Fabrication Mini Skid Steer Pallet Forks CNC-machined carriage bars with multiple locking positions provide versatile tine spacing for vario...

View full details

$750.00 - $770.00

$750.00

$750.00 - $770.00

$750.00

Top Picks

Loflin Fabrication Mini Skid Steer Fork Frames

Quick-attach fork frame for lifting pallets and lumber loads.

$750.00

Mini Skid Steer Pallet Forks Built Around a Forged Frame

This collection is narrow on purpose: one attachment, priced at $750. It is a forged alloy steel frame rather than a bolt-together stamping, and the published specifications are the whole story.

Spec	Loflin Fabrication Mini Skid Steer Fork Frames
Steel thickness	1 3/8" thick forged alloy steel
Frame width	4" wide solid forged alloy steel
Fork guard	1/4" plate steel
Fork lengths	36", 42", 48"
Mounts	Toro Dingo and Bobcat MT50 stocked; custom mounts available
Carriage bar	CNC-machined, multiple locking positions

The carriage bar is the part most buyers overlook. Multiple locking positions set how far apart the tines sit, so one frame handles narrow crates and wide pallets without shimming or guessing. Fork length is the other decision: shorter forks keep the load closer to the machine and are easier to work with inside a trailer or a tight yard, while longer forks support deeper loads but push the load center further out.

Mount Compatibility: Mini Loaders and Mini Excavators

Mini machine attachment interfaces are not standardized the way full-size ones are. These frames are stocked with Toro Dingo and Bobcat MT50 mounts, with additional custom mounts available. If you run a different mini loader, a different Bobcat MT model, or want a fork attachment for a mini excavator, confirm the mount before ordering — an excavator connects through a quick coupler or pin-on arrangement, not a loader mount plate, so that is a custom-mount conversation. Full-size skid loader pallet forks use a larger quick-attach plate and are a different product class; these frames are sized for mini machines.

Capacity, Training and Upkeep

Our product data lists steel thickness and dimensions but no rated load capacity for this frame, so do not assume one. In practice the limit is the machine: the rated operating capacity published in your loader's operator's manual, and how far the load center sits from the mount. OSHA 1910.178 sets training, inspection and operating requirements for powered industrial trucks — if you are handling palletized loads with forks, check that standard against your machine and application. Before each shift, look at the welds where the carriage bar meets the frame, the locking positions, and the fork heel for wear or bending.