What is an excavator ripper attachment used for?

A ripper concentrates the excavator's full breakout force on a single tip to fracture material a bucket only scrapes: frost, hardpan, shale, caliche, compacted fill, asphalt edges and root mass. It is a loosening tool, not a loading tool. You rip a section, then switch back to a bucket to remove the spoil. It also opens utility trenches in ground too hard for a toothed bucket.

What size excavator ripper do I need?

Size by carrier weight, not by material hardness. The Geith Excavator Ripper Tooth is sold in tonnage bands, from the RT08 for 4-8 ton machines up to the RT75 for 52-75 ton machines. The Amulet Excavator Ripper - Severe-Duty spans 11 weight classes, from 1-3 ton excavators through 40-50 ton excavators. Match the band first, then confirm your exact model on the fitment chart.

Can you put a ripper on a mini excavator?

Yes. The Amulet Excavator Ripper - Severe-Duty covers weight classes starting at 1-3 ton excavators, and the Geith RT08 is rated for 4-8 ton machines. On a small carrier the limiting factor is usually machine stability and stick strength rather than the tooth itself, so take shallow passes, pull in line with the stick, and keep the tracks square to the cut.

What are the most common problems with excavator attachments?

Mount mismatch leads the list — wrong coupler style, wrong pin diameter, wrong ear spacing — rather than a broken tool. The Amulet ripper is available as a blank weld-on plate, wedge-style, pin-on / pin-grabber-style, or Wain-Roy / cross-pin-style coupler, so verify your machine against the Amulet fitment chart first. The second most common problem is side-loading the shank by swinging instead of pulling.

Do I need a quick coupler to run a ripper?

Not always. The Amulet Excavator Ripper - Severe-Duty is offered with a blank weld-on plate for machines with non-standard or dedicated hitches, alongside wedge-style, pin-on / pin-grabber-style and Wain-Roy / cross-pin-style coupler configurations. If you already run a quick coupler, order the matching configuration. If not, the weld-on plate route needs a qualified welder and correct pin geometry to be safe.

Excavator Ripper Attachments

Excavator ripper attachments break frost, shale, hardpan and root mass that a bucket only skates across. This collection carries two: the Amulet Excavator Ripper - Severe-Duty, built in 15 configurations across 11 excavator weight classes from 1-3 ton up to 40-50 ton machines, and the Geith Excavator Ripper Tooth, sized RT08 through RT75 for 4-75 ton carriers. Priced $1,095 to $2,040.

Sort by

View as

Amulet Excavator Ripper - Severe-Duty

$1,095.00 - $8,795.00

$1,095.00

$1,095.00 - $8,795.00

$1,095.00

Available to order

Buy Now, Pay Later

Amulet Excavator Ripper - Severe-Duty The Amulet Excavator Ripper – Severe Duty is engineered to operate effectively in the most difficult terrain,...

View full details

$1,095.00 - $8,795.00

$1,095.00

$1,095.00 - $8,795.00

$1,095.00

Geith Excavator Ripper Tooth

$2,040.00 - $14,800.00

$2,040.00

$2,040.00 - $14,800.00

$2,040.00

Available to order

Buy Now, Pay Later

Geith Excavator Ripper Tooth Unleash unmatched digging and ripping power and increased durability with the Premium Excavator Ripper Tooth from Geit...

View full details

$2,040.00 - $14,800.00

$2,040.00

$2,040.00 - $14,800.00

$2,040.00

Top Picks

Amulet Excavator Ripper - Severe-Duty

Severe-duty single-tooth ripper for frozen ground, rock, and hardpan.

$1,095.00

Geith Excavator Ripper Tooth

Geith ripper tooth for roots, compacted soil, and demolition work.

$2,040.00

How to Choose an Excavator Ripper Attachment

A ripper is a single-point tool: the machine's whole breakout force lands on one tip, which is why it fractures frozen ground, shale, caliche, compacted fill, asphalt edges and stumps that a bucket cannot. Sizing follows carrier weight, not how hard the material looks. Undersize the machine and you get no penetration; oversize the tool and you load the stick, boom and coupler instead of the ground. The Geith Excavator Ripper Tooth is sold by tonnage band:

Machine Weight (Tons)	Model	Shank Thickness (mm)	Approx. Work Depth (mm)
4-8	RT08	90	660
8-14	RT14	102	813
14-18	RT18	114	940
18-30	RT30	114	1039
30-38	RT38	130	1246
38-52	RT52	130	1522

The range continues with the RT75 for 52-75 ton machines. After fitment, shank thickness and work depth are the two numbers that matter: a thicker shank resists twisting when the tip catches an edge, and work depth sets how deep one pass goes before you reposition.

Mounting, Fitment and Coupler Type

Most trouble with a ripper attachment for an excavator is mount mismatch, not tool failure. The Amulet Excavator Ripper - Severe-Duty is offered with a blank weld-on plate, wedge-style coupler, pin-on / pin-grabber-style coupler, or Wain-Roy / cross-pin-style coupler, across 15 configurations and 11 weight classes. Check your make and model against the Amulet fitment chart before ordering, and have pin diameter, pin centers and ear spacing on hand. The blank weld-on plate is the fallback for a non-standard hitch, and it means a qualified welder, not a field tack.

Site Conditions and Operating Practice

Ripping is a pulling operation: curl and draw the tip toward the machine in line with the stick. Swinging the boom side-loads the shank and cracks weld plates. Work shallow passes and let the tooth follow a natural seam rather than forcing a straight line. Before excavation begins, OSHA 1926.651(b) requires that the estimated location of underground utility installations be determined and the utility owners contacted; a ripper tip reaches a gas line long before an operator sees it. Rock and frost also load carrier pins and bushings harder than general digging, so shorten the greasing interval while the ripper is on.