What size mini skid steer dozer blade do I need?

Match blade width to your machine's track or tire width, then add margin so pushed material clears the undercarriage. The Loflin Fabrication blade here is 48" wide and 17" tall, with widths available from 48" to 72". Narrower suits tight backyards, trenches and gate access; wider moves more dirt per pass on open ground but loads the machine harder on grades.

What is the 70/30 rule for skid steers?

It is an operator rule of thumb about weight distribution, not a published standard: roughly 70 percent of an unloaded machine's weight sits over the rear axle and 30 percent over the front, and that balance shifts forward as you load and lift. It matters most with buckets and forks. Always work to the manufacturer's rated operating capacity for your specific machine rather than to the rule of thumb.

Do mini skid steer attachments work on a full-size skid steer?

Generally no. Full-size skid steers use a larger quick-attach plate and deliver far more hydraulic flow and breakout force than mini loader attachments are built for. Adapter plates exist, but a mini-sized blade is undersized for a full-size machine and can be bent or torn loose. Buy the attachment built for the class of machine you actually run.

Do all mini skid steers use the same attachments?

Not universally. Most compact stand-on and walk-behind loaders share a common mini mount plate, which is why attachments swap between many brands, but some manufacturers have used their own plate designs or different auxiliary hydraulic couplers. Before ordering, confirm your loader's mount plate and that it has an auxiliary circuit — the hydraulic pivot cylinder on this blade needs one to angle.

What are the best attachments for a mini skid steer?

It depends on the work. A bucket handles loading and carrying, augers set posts, grapples move brush, and a dozer blade like the Loflin Fabrication unit here handles grading, backfill and pushing dirt — jobs a bucket does slowly. Contractors doing site prep and driveway work typically pair a bucket with a blade, since neither does the other's job well.

Mini Skid Steer Dozer Blades

Mini skid steer dozer blades are for grading, backfilling and pushing dirt — work a bucket does slowly and in short bites. This collection is a single unit: the Loflin Fabrication Mini Skid Steer Dozer Blade at $1,308, with a 48" working width, a 3/16" steel frame and a bolt-on reversible cutting edge. Below the listing you will find sizing, mounting and hydraulic notes for mini skid steer dirt blades.

Sort by

View as

Loflin Fabrication Mini Skid Steer Dozer Blade

$1,308.00 - $1,308.00

$1,308.00

$1,308.00 - $1,308.00

$1,308.00

Available to order

Buy Now, Pay Later

Loflin Fabrication Mini Skid Steer Dozer Blade The Loflin Fabrication Mini Skid Steer Dozer Blade combines American-made quality with powerful perf...

View full details

$1,308.00 - $1,308.00

$1,308.00

$1,308.00 - $1,308.00

$1,308.00

Top Picks

Loflin Fabrication Mini Skid Steer Dozer Blade

Loflin Fabrication blade for grading, leveling, backfill, and snow work.

$1,308.00

Mini Skid Steer Dozer Blade vs. a Bucket for Dirt Work

A bucket carries material; a blade moves it. Mini skid steer dirt blades push spoil, backfill trenches, spread driveway stone, cut grade on a slope and pull material back toward the machine in reverse. Because the blade sits ahead of the loader arms on a pivot, you can angle it and windrow material off to one side instead of piling everything straight ahead — that is why a blade finishes site cleanup and rough grading in fewer passes than a bucket. The trade-off is real: a blade will not load a truck or lift material, so most contractors run one alongside a bucket, not instead of it.

The Blade We Carry

One unit, one brand. Verified specifications:

Loflin Fabrication Mini Skid Steer Dozer Blade	$1,308
Working width	48" wide (available 48" to 72")
Blade height	17" tall
Frame	3/16" thick steel
Cutting edge	5/8" thick x 6" wide bolt-on, reversible steel
Optional rubber edge	1-1/2" x 10"
Pivot cylinder	2-inch bore x 10-inch stroke hydraulic

Two details matter in daily use. The cutting edge is bolt-on and reversible, so when one side dulls you flip it and eventually swap it out with hand tools instead of torching and welding a worn edge off the moldboard. The optional rubber edge is what you want over finished concrete, asphalt or pavers, where a steel edge gouges. The hydraulic pivot cylinder lets you change blade angle from the seat rather than climbing off to pull pins.

Matching the Blade to Your Machine and Site

Start with width. A blade should cover at least the track or tire width of the loader, or you drive over the material you just pushed; the 48" width suits most compact walk-behind and stand-on units, and wider builds up to 72" are available where you are moving volume on open ground. Next, confirm the attachment plate matches your machine — mini loader mounts are not universal across every brand. Finally, the pivot cylinder needs an auxiliary hydraulic circuit at the mount; check that your loader has one and what flow it delivers. On construction sites, OSHA 1926.602 covers earthmoving equipment and requires seat belts on machines within its scope.