Phone: +1 (307) 441-5529
Mail:info@vovlift.com
Mon to Fri (10 AM to 6 PM) ET
FREE SHIPPING ON SELECTED BRANDS & NO SALES TAX
FREE SHIPPING ON SELECTED BRANDS & NO SALES TAX
Take $100 Off Orders Over $2000! | CODE
$100 OFF CODE
WELCOME
Phone: +1 (307) 441-5529
Mail:info@vovlift.com
Mon to Fri (10 AM to 6 PM) ET
Drum handling equipment covers the trucks, lifters, positioners, pumps and disposal tools that move a 30- or 55-gallon drum without putting the load on a worker's back. This collection lists Vestil products grouped by the motion you need: rolling a drum across a floor, lifting and rotating it, clamping it to a forklift, pumping or heating the contents, or deheading and crushing the empty. Sort first by how the drum is handled, then by power source — manual, pneumatic, hydraulic or electric — and by whether the equipment has to survive washdown or rough terrain.
Take the Drum Crusher to where the drums are! Full cycle time is 25 seconds, crush and retract. Save time and trips by transporting drums that are ...
View full detailsHydraulic Drum Dumpers for Safe Drum Lifting and Controlled Material Pouring Hydraulic drum dumpers provide a safe and efficient solution for lifti...
View full detailsPneumatic Drum Compactors for 55 Gallon Waste Reduction Pneumatic Drum Compactors provide an efficient and cost-effective solution for reducing the...
View full detailsModel DRUM-LRT features a hand pump to lift steel drums from ground level to a raised height of 62" to bottom of drum in vertical position. For use...
View full detailsForklift Drum Positioners for Horizontal Drum Racking and Rotation Forklift drum positioners provide a controlled way to rotate standing drums into...
View full detailsDrum Handling Transporters and Mobile Drum Lifting Equipment Economical Drum Transporters provide a practical and cost-effective solution for lifti...
View full details115V Electric Drum Pumps for Efficient Liquid Transfer and Dispensing Electric drum pumps provide a faster, cleaner way to transfer and dispense li...
View full detailsHere is an efficient, economical way to handle 55 gallon steel drums. Sturdy handle provides leverage for heavy lifting and easily locks drum in po...
View full detailsOne of the most versatile drum trucks in the industry. This innovative product allows the operator to easily tip back the truck in order to transpo...
View full detailsThe Vestil VWS-AA-SDG is a steel single drum grip attachment for the Vestil manual winch stacker. Vestil states that the unit lets the user secure ...
View full detailsThe Vestil S-MU-VDGR-PDRM-55 is a steel poly drum gripper option for 55 gallon drums, for the Vestil fully powered vertical gripper/rotator (S-MU)....
View full detailsTransport cylinders safely with casters, overhead lifting assembly, fork mounted or pallet jack style cylinder caddies. These units can hold anywhe...
View full detailsThe Vestil S-MU-VDGR-PDRM-30 is a steel poly drum gripper option for 30 gallon drums, for the Vestil fully powered vertical gripper/rotator (S-MU)....
View full detailsGalvanized 55-Gallon Drum Covers for Open and Closed Head Drums Galvanized 55-gallon drum covers provide a simple way to help protect drum tops, re...
View full detailsThe Vestil RT-EPT-SDG is a steel single drum gripper attachment for the Vestil rough terrain electric pallet truck. It grips a single 55 gallon dru...
View full detailsMove, tilt and unload heavy 30 or 55-gallon steel drums with ease. A foot rest helps in loading and supports a loaded drum truck. Unit rolls quietl...
View full detailsThe Barrel/Drum Truck handles 30 and 55-gallon steel and fiber drums that are 24" to 48" high. Adjustable chime hook helps to secure the drum. 12" ...
View full detailsQuickly and efficiently heat-up your steel drums or pails. Easily adjust thermostat set-point: 50 to 425 degrees Fahenheit for steel drums and 50 t...
View full detailsQuickly and easily dispense drum contents with our Drum Faucets. Available in plastic, stainless steel, aluminum, and brass. Polyethylene Drum Fauc...
View full detailsDrum Stand provides economical and convenient portability. These stands offer a uniquely designed understructure that allows for transporting of dr...
View full detailsFor dispensing and transferring liquids out of 55-gallon drums. RDP-55 - Ideal for light oils, anti-freeze, and other light non-flammable and non-c...
View full detailsLow-Profile Drum Dollies and Caddies for Safer Drum Transport Low-profile drum dollies and caddies help reduce manual lifting when moving 30 gallon...
View full detailsA drum adapter is specifically designed to hold and support drums during loading, unloading, and transport. Each drum adaptor is adjustable, so you...
View full detailsThis drum tie down is a great asset for both work and home. The tie-down has a 24" diameter creating a snug fit over the top of a 55 gallon drum. O...
View full details





A filled drum is an awkward, top-heavy, rolling load, and almost every product here exists to replace one specific manual motion. Drum trucks and cradles tilt a standing drum back onto two wheels so one person can roll it across a floor. Low-profile drum caddies keep the drum upright for short repositioning moves and, in the Vestil version stocked here, put a bung wrench in the handle. Positioners and rotators turn a drum between vertical and horizontal for dispensing or sampling. Hydraulic drum dumpers lift a drum and invert it into a hopper, bin or mixer. Gripper attachments let a forklift or rough-terrain machine clamp and carry a drum. Pumps, faucets and heaters move product out of the drum. Covers, locks, tie-downs, tiers and stands control the drum in storage or transit. Deheaders, crushers and compactors deal with the drum at end of life. Deciding which of those nine jobs you actually have is the whole selection exercise.
The question that decides power source is not how heavy the drum is, it is how many drums per shift. A maintenance shop that decants a pail of oil twice a day is served by a manual drum truck and a lever-action drum pump. A plant that empties drums continuously wants electric: the Vestil electric drum pump, model EDP, is a 115-volt unit with a 2-inch bung fitting, and it runs from an ordinary single-phase circuit rather than needing three-phase service. Between those extremes, rotary drum pumps handle repeated transfers with far less operator fatigue than lever action.
The same logic applies to lifting. Vestil's hydraulic drum dumpers are offered with either a 12V DC power unit or a 115V AC power unit as listed options, so the choice comes down to whether the unit stays at a fixed station near power or travels. Utility yards and remote sites are why the gasoline-powered drum crusher exists at all, and the pneumatic 55-gallon drum compactor, model MTC-PNU-55, assumes you already have a compressed-air supply at the point of use. Do not buy a pneumatic unit for a corner of the building the air lines do not reach.
Gripper attachments are the part of this category most often bought incorrectly. Two rules matter. First, OSHA 1910.178(a)(4) states that modifications and additions affecting capacity and safe operation shall not be performed without the truck manufacturer's prior written approval, and that capacity, operation and maintenance instruction plates must be changed accordingly. Second, an attachment adds its own weight and pushes the load center forward, so the truck's rated capacity drops — sometimes substantially. Get the revised data plate from the truck manufacturer before the attachment goes into service, not after.
ANSI/ITSDF B56.1 covers the safety requirements for powered industrial trucks and their attachments, and OSHA 1910.178(l) requires employers to train and evaluate operators, including on the attachments fitted to the truck. If instead you are hanging a drum grab from a hoist or crane, ASME B30.20 addresses below-the-hook lifting devices and is the standard your inspection and marking practice should follow. Manual winch-stack and single-drum grip attachments still need a documented pre-use check even though no OSHA powered-truck training rule applies to them.
Contents drive more of this decision than most buyers expect. Chemical compatibility of pump wetted parts, seals and hose is the first check; the poly drum options offered here in 30-gallon and 55-gallon sizes exist because steel is the wrong container for some fluids. Viscous product that will not flow at ambient temperature is what drum heaters are for — trying to pump cold, thick material instead usually damages the pump. Gravity dispensing from a horizontal drum on a stand or tier, using a manual drum faucet, is the cheapest arrangement when the fluid is benign and the volume is low.
Regulated contents add requirements. OSHA 1910.106 addresses the handling and transfer of flammable liquids, including bonding and grounding when Class I liquids are moved between containers. EPA's RCRA container standards at 40 CFR 265.173 require a container holding hazardous waste to be closed during storage except when waste is being added or removed, which is precisely the job of drum covers, bung nut wrenches and drum locks. For over-the-road movement, FMCSA cargo securement rules in 49 CFR 393 govern how drums are restrained on a vehicle — the role of drum tie-downs.
Wheel specification is a real decision, not a trim level. Vestil's multi-purpose drum truck cradle is offered three ways: mold-on rubber (RDBT-MR), polyolefin (RDBT-PO) and steel (RDBT-SS). Mold-on rubber rolls quietly and is easy on sealed and finished floors. Polyolefin resists chemicals and repeated washdown. Steel is for rough, hot or debris-strewn surfaces where a softer tread would cut, embed swarf or flat-spot. Outside on unimproved ground, none of them work well, which is why a rough-terrain gripper attachment is a separate product rather than an option.
Check the rest of the site before ordering: aisle width and turning room for a loaded drum truck, overhead clearance and hopper height for a dumper, and floor drainage if you are crushing or compacting. The washdown upgrade and aluminum drip pan offered for the hydraulic drum crusher exist because residue is a normal outcome of that process, not an exception.
| Model # | Description |
|---|---|
| RDBT-MR | Drum truck cradle with mold-on rubber wheels |
| EDP | Electric drum pump, 115 volt, 2 in bung |
| DRUM-P-55 | Drum positioner, 55 gallon, 800 lb capacity |
| MTC-PNU-55 | Pneumatic 55 gallon drum compactor |
Every item in this collection is Vestil. The products with published specification data here list Made in USA (Vestil Manufacturing) and Vestil's limited warranty, whose period depends on the model — see the Warranty tab on each product page.
Drum handling equipment is any purpose-built tool for moving, lifting, rotating, dispensing from or disposing of a drum instead of manhandling it. In this collection that spans drum trucks and cradles, low-profile drum caddies, positioners and rotators, hydraulic drum dumpers, forklift and crane gripper attachments, rotary, lever-action and electric pumps, covers, locks, tie-downs, deheaders, crushers and compactors, all from Vestil.
Choose a drum truck when you need to tilt a standing drum back and roll it some distance; the cradle and long handle give you the leverage and control to do that safely. Choose a low-profile drum caddy when the drum stays upright and moves only a short way, such as between a pallet and a dispensing station. The Vestil low-profile caddies here include a bung wrench handle.
Both Vestil drum positioners in this collection — DRUM-P-30 for 30-gallon drums and DRUM-P-55 for 55-gallon drums — are rated at 800 lb capacity. The Vestil hydraulic drum dumper family lists a capacity range of 750 to 1,500 lb across its available models. Weigh your drum plus contents and check it against the specific model number you are ordering, not the range.
Only with the truck manufacturer's approval. OSHA 1910.178(a)(4) states that modifications and additions affecting capacity and safe operation shall not be performed without the manufacturer's prior written approval, and that capacity, operation and maintenance instruction plates must be changed accordingly. The attachment also adds weight and shifts the load center forward, so net capacity falls. Obtain the revised data plate before putting it to work.
For powered industrial trucks, yes. OSHA 1910.178(l) requires employers to train and evaluate operators of powered industrial trucks, including on the attachments the truck carries, and ANSI/ITSDF B56.1 covers the safety requirements for those trucks and attachments. Manual drum trucks and caddies are not powered industrial trucks, but operators still need instruction in tilt technique, controlled lowering and pinch-point awareness.
Match the pump to volume and fluid. Lever-action drum pumps suit occasional decanting of small quantities. Rotary drum pumps handle repeated transfers with far less operator fatigue. The Vestil electric drum pump, model EDP, is a 115-volt unit with a 2-inch bung fitting and makes sense where drums are emptied continuously. Check the pump's wetted materials against your fluid before ordering.
Vestil offers the multi-purpose drum truck cradle in three wheel types: mold-on rubber (RDBT-MR), polyolefin (RDBT-PO) and steel (RDBT-SS). Mold-on rubber rolls quietly and is easy on sealed floors. Polyolefin resists chemicals and repeated washdown. Steel suits rough, hot or debris-strewn surfaces where a softer tread would cut or flat-spot.
If they hold hazardous waste, yes. EPA's RCRA container standards at 40 CFR 265.173 require a container holding hazardous waste to be closed during storage except when waste is being added or removed — which is what drum covers, bung nut wrenches and drum locks are for. For road transport, FMCSA cargo securement rules in 49 CFR 393 govern how drums are restrained on a vehicle.
Enjoy free shipping on selected brands & no sales tax!
Inspect your delivery and note any damage on the delivery receipt. Damage claims follow our Return & Refund Policy.
Speak to a sales rep or forklift expert.
We use encrypted SSL security to ensure that your credit card information is protected.
+ 30-day coverage on wearable items (tires, bulbs, seals).
Wear items (pads, pins, lifting bails) excluded.
Select items (auger drives, forks, grapples, buckets, mixers) carry 6-month–2-year terms.