Triumph NSS-8XLT 8,000 lb Four-Post Storage and Service Lift

Triumph NSS-8XLT 8,000 lb Four-Post Storage and Service Lift

See more by Triumph

$3,150.00 - $3,950.00

$3,150.00

$3,150.00 - $3,950.00

$3,150.00

In stock

SKU NSS-8XLTF-G

Delivery Option: Warehouse Pickup

Pick up at a Triumph warehouse

Quantity

Product Overview

In short

The Triumph NSS-8XLT is a four-post automotive lift with an 8,000 lb capacity that works as both a service lift and a two-car storage lift. It runs on 110-volt household current and includes a caster kit, jack tray, and three drip trays.

Storage and service in one four-post lift

The NSS-8XLT is an 8,000-lb four-post lift built to do two jobs: everyday service work and long-term vehicle storage. Drive a car up the ramps, raise it in about 40 seconds, and either work underneath at the 82-inch lift height or park a second vehicle below to reclaim a full bay. Ten lock positions engage automatically as the runways rise, and a single-point lock release drops them together, so the load rests on mechanical locks rather than on hydraulics while you work or while the car sits parked overhead. Triumph has shipped this same four-post design for more than 20 years. The standard color is grey.

Fit, clearance and loading

The lift is 112 inches wide overall and stands 94 inches tall on its own, which is the number to check against your ceiling before you account for stacked vehicles. Drive-thru width is 99 inches, and the two 18-inch runways sit 37 inches apart over a 180-inch runway length, so full-size trucks and long-wheelbase vehicles have room to load squarely. Lowered height is 5 inches, so low cars clear the approach ramps without scraping. At full height there is 79 inches of clearance under the runways. For stacked storage, measure both vehicles: the ceiling has to clear the lower car, the raised runways, and whatever is parked on top.

Power, fluid and jacking

Power comes from a 110-volt hydraulic power unit that plugs into standard household current on a dedicated 30-amp circuit — no 220V and no three-phase service required. Do not run the lift from a generator; power surges can damage the motor. The unit mounts to a column at the drive-in end and includes a manual lowering lever, a steel oil tank, and a UL-listed plug. Plan on roughly 3 gallons of AW32 hydraulic oil to fill it during setup; the fluid is a separate purchase you should have on hand before assembly day. The center jack tray holds a bottle or floor jack for wheels-free work, and the Triumph SJ-35 rolling bridge jack is a compatible add-on.

What ships, and what it will not do

The NSS-8XLT arrives as a complete four-post kit: four columns on 12-inch by 12-inch base plates, two diamond-plate runways, two cross rails, the 110V power unit and hose, four caster dollies, a steel jack tray, three plastic drip trays, two aluminum drive-on ramps, plus runway stops, lock release rods, cables, and hardware. The caster kit lets you roll the lift to a different spot in the garage when it is empty — it is not rated to move a loaded lift, so never reposition it with a vehicle on the runways. The lift ships LTL freight at about 1,800 lbs crated, and you are responsible for having equipment on site to take it off the truck.

Key features

8,000 lb capacity — rated across four posts for cars, trucks, and SUVs up to that weight
10 automatic lock positions — locks engage as the lift rises, with a single-point release to lower them together
110V power unit — plugs into standard household current on a dedicated 30-amp circuit, with a steel oil tank and UL-listed plug
99-inch drive-thru width — 180-inch runways give full-size trucks and long-wheelbase vehicles room to load
5-inch lowered height — low cars clear the aluminum diamond-plate approach ramps, which are light enough to lift out by hand
Caster kit included — four caster dollies for repositioning the empty lift around the garage
Jack tray and three drip trays — run a bottle or floor jack for wheels-free work, and keep fluids off the vehicle parked below

Specification Table

NSS-8XLTF-G · TriumphSKU NSS-8XLTF-G
Capacity	8,000 lbs
Overall height	94"
Overall width	112"
Lift height	82"
Height under runway	79"
Runway length	180"
Runway width	18"
Between runways	37"
Drive-thru width	99"
Lowered height	5"
Locking positions	10
Lock release	Single point
Lift time	40 seconds
Base plate size	12" x 12"
Approach ramps	Aluminum diamond-plate
Power	110V, dedicated 30-amp circuit
Hydraulic fluid	AW32 (approx. 3 gallons)
Shipping weight	1,800 lbs
Standard color	Grey

Compare models

	NSS-8XLT 8,000 lb Four-Post THIS	NSS-8F-G 8,000 lb Four-Post Storage Lift	NSS-8SQ 8,000 lb Four-Post (Shorter Length)	USA8000 8,000 lb Four-Post
Capacity	8,000 lbs	8,000 lbs	8,000 lbs	8,000 lbs
Lift height	82"	72"	72"	73"
Height under runway	79"	69"	141"	112" (124" with power unit)
Overall width	112"	106"	106"	102.5"
Price	$3,150.00	$2,875.00	$3,195.00	$4,599.00
	Viewing	Check ›	Check ›	Check ›

Specs from Triumph manuals. Prices update live and reflect current promotions.

FAQ about this model

What are the electrical requirements for the NSS-8XLT?
The power unit runs on standard 110-volt household current and needs a dedicated 30-amp circuit. No 220V or three-phase service is required, and you should not run the lift from a generator — power surges can damage the motor.

How much ceiling height do I need?
The lift is 94 inches tall on its own, and clearance under the runways at full lift height is 79 inches. For stacked storage you need enough ceiling for the lower vehicle, the raised runways, and the vehicle on top, so measure both cars before ordering.

Do I need to add hydraulic fluid?
Yes. Plan on approximately 3 gallons of AW32 hydraulic oil to fill the power unit during setup.

Will a full-size truck fit on this lift?
The 99-inch drive-thru clearance and 180-inch runways give full-size trucks and long-wheelbase vehicles room to load squarely, up to the 8,000 lb rated capacity.

Is the NSS-8XLT really portable?
The included caster kit lets you roll the empty lift to reposition it in the garage. Do not move the lift with a vehicle on it — the casters are not rated to transport a loaded lift.

What comes in the box?
Four columns on 12" x 12" base plates, two diamond-plate runways, two cross rails, the 110-volt power unit and hydraulic hose, a caster kit with four dollies, a steel jack tray, three plastic drip trays, two aluminum drive-on ramps, and runway stops, lock release rods, cables, and assembly hardware.

Can I lift the wheels off the runways for brake or tire work?
Yes. The center jack tray holds a bottle jack or floor jack to raise one end of the vehicle, and the Triumph SJ-35 rolling bridge jack is a compatible add-on.

How does it ship, and what do I need to unload it?
It ships by LTL freight on a 48-foot semi and weighs about 1,800 lbs crated. The driver will not unload it and liftgate service is not available for auto lifts, so you need a forklift, tractor, Bobcat, tow truck, or similar equipment on site. If you cannot unload at your location, the lift can be routed to the carrier's nearest freight terminal for pickup.

What does the warranty cover?
Triumph covers the NSS-8XLT with a 1-year parts warranty — parts only, no labor. Hydraulic cylinders carry a 30-day full warranty, after which Triumph provides a seal kit; rubber lifting pads are not covered.

Shipping & Returns

We offer standard 1-5 business day shipping (following dispatch) via LTL Freight, FedEx, UPS, DHL, or USPS. Orders typically process in 1-2 business days (starting the following business day). Shipping rates are usually calculated at checkout; however, we reserve the right to provide custom shipping quotes for oversized or specialized equipment.

60-DAY NO-HASSLE REFUNDS AND RETURNS

If there’s an issue with your product, we make refunds and returns quick and easy.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused or unused, with tags, and in its original packaging. To contact us, email info@vovlift.com

More information on shipping and returns can be found here.

Warranty

Triumph Limited Warranty. Triumph covers parts and product defects for one (1) year; labor is not included. Hydraulic cylinders carry a 30-day full warranty, after which a seal kit is supplied for cylinder service. Rubber lifting pads are not covered. The warranty applies to the original purchaser with proof of purchase.

FAQ

How long will it take for my order to ship? When will I receive it?
Most orders are processed within 1-2 business days, starting the business day following the date the order was placed. Once dispatched, standard shipping typically takes an additional 1-5 business days (starting the business day after shipment).

In total, you can generally expect your order to arrive within 2-7 business days. Please note that larger equipment, oversized items, or specialized products may require additional handling and transit time.

Read more about our Shipping Policy.

Which payment methods do you accept?
We are committed to ensuring a safe shopping experience on our Website. We place the highest value on your privacy and security.

We accept all major credit cards and payments made via Visa, Mastercard, American Express, Discover, Diners Club, Shop Pay, Apple Pay, Google Pay, Meta Pay, and PayPal.

What is your return policy?
Vovlift accepts returns within 60 days from the delivery date. To be eligible for a return, your item must be unused, in the same condition that you received it, and in its original packaging. Please include the original order confirmation or packing slip when returning an item.

Please read our Return Policy.

What if my product is damaged?
If you receive a damaged or defective item, please contact us immediately at info@vovlift.com with details and photos of the issue. We will work to resolve the problem promptly.

How do I place an order?
To place an order online, simply click “Add To Cart” on your preferred product and proceed to checkout. Enter your shipping and billing information and complete checkout.

How do I know when my order will ship?
Once you place your order, you will receive a confirmation email confirmation credit card authorization and shipping/billing information.

We will immediately process your order and you will receive an email confirming your order has shipped with a tracking number once it leaves the warehouse.

If an item goes out of stock, you will be notified via email or phone within one business day. We take great measures to ensure all products listed on our website are in stock, but often times items can quickly sell out due to high demand.

Will you send an order confirmation via e-mail?
An order confirmation message will be sent to the e-mail address you provide us for each order you submit. We recommend that you print and save the e-mail confirmation for your records. Please be sure to enter your e-mail address correctly to ensure that you receive your order confirmation.

Can I change my order?
Yes, you can change your order at no cost by simply emailing us at info@vovlift.com.

TRIUMPHAutomotive Shop Equipment

Shop Equipment That Earns Its Floor Space

Triumph builds the machines a working bay actually runs on: two-post and four-post vehicle lifts from 7,000 to 50,000 lb, truck and passenger tire changers, wheel balancers, rolling bridge jacks, shop presses and oil drains.

The lifts are manufactured to ISO 9001 quality standards and are CE certified. Every machine ships with a one-year parts warranty, and you can pick your order up yourself at one of three US warehouses instead of paying freight.

View our Triumph Equipment Collection

Certified Build

Manufactured to ISO 9001 quality standards and CE certified — not a claim, a certification.

High-Performance Design
Rigorous Testing Process
Advanced Technical Solutions

Capacity For Any Bay

From a 7,000 lb portable two-post to a 50,000 lb four-post — passenger cars through heavy trucks.

Reinforced Steel Carriages
Industrial-Strength Components
Handles Daily Shop Abuse

Pick Up Or Ship

Collect at Columbus OH, Fort Worth TX or North Las Vegas NV and skip the freight cost.

Strategic US Distribution Hubs
Rapid Delivery Nationwide
Expert Support in the USA

One-Year Parts Warranty

Parts and defects covered for a full year, with a seal kit supplied for cylinder service after 30 days.

Strict Quality-Control Process
Professional-Grade Standards
Unbeatable Value & Performance

Excellent

Based on 27 reviews

Trustpilot

5 stars as always

5 stars as always. Our school used this store again and once again everything went great.

Joann Alford, December 17, 2024

We ordered Makinex dual pressure…

We ordered Makinex dual pressure cleaner and Movexx electric tug. Everything came fast in great condition. We will back.

Ronald Jones, December 17, 2024

I recived package than expect

I recived package than expect. Good store.

Jacob Hollingsworth, December 5, 2024

Second purchase and excellent service

Second purchase and excellent service. Highly recommend.

Allen Martin, December 16, 2024

I’m very impressed with the quality and…

I’m very impressed with the quality and reliability of the equipment. Highly recommend Vovlift for anyone in need of industrial machinery!

James Jones, October 10, 2024

Everything was good

Everything was good, only 4 stars because I recived wrong model but everything go fixed fast.

Max Halsted, October 10, 2024

If you are looking Apollolift products…

If you are looking Apollolift products in good price, this is right place. 5 stars.

Dan Friddle, August 21, 2024