Triumph NSP-20 20 Ton Shop Press

See more by Triumph

$1,100.00 - $1,295.00

$1,100.00

$1,100.00 - $1,295.00

$1,100.00

In stock

SKU NSP-20

Delivery Option: Warehouse Pickup

Pick up at a Triumph warehouse

Quantity

Product Overview

In short

The Triumph NSP-20 is a 20 ton manually driven shop press built for pressing bearings and similar press-fit work. It measures 21 ½ between the uprights on a 25 ½ wide x 22 long base, with an overall height of 60".

What the NSP-20 is

The NSP-20 is a 20 ton shop press, and the manufacturer lists it as manually driven — you work the ram by hand rather than through an electric pump or an air-over-hydraulic setup. The listing calls it a press that is great for pressing bearings, which is the job most shops buy a press in this class for: bearings, bushings and similar press-fit parts that need controlled, straight-line force rather than hammer blows. Because it is hand operated, there is nothing to wire and no air line to run to it, so placement in the shop is governed by floor space and access rather than by utilities. Everything described on this page comes from the published specification; where that specification is silent, this page stays silent rather than guessing.

Working width and footprint

Two numbers decide whether a press fits your work: how much room you have between the uprights, and how much floor the frame occupies. The NSP-20 gives 21 ½ between uprights, which is the clear span your part, bed plates and any support fixtures have to live inside. The base measures 25 ½ wide x 22 long, so the frame takes up a compact rectangle of floor — roughly the plan area of a rolling tool cart. Overall height is 60", low enough to sit under most shop ceilings and low enough to see over from a standing position. Measure the widest hub, housing or axle assembly you expect to press and compare it against the 21 ½ span before ordering, since that dimension is the hard limit on part size.

Manual operation and shop utilities

The listing specifies manual drive, so the NSP-20 does not depend on shop power or compressed air to do its work. For a home garage or a mobile setup with limited electrical service, that removes an installation step entirely: no dedicated circuit, no receptacle, no compressor sizing exercise. The trade-off is throughput and effort. Hand pumping is slower than a powered ram and takes physical work at the handle, which matters if you press parts all day but rarely matters for the occasional bearing, bushing or pin. If your shop presses parts in volume and you want an air-over-hydraulic or electric ram instead, that is a different machine — the NSP-20 is specified as manually driven and should be evaluated on that basis.

What the listing does not state

In the interest of an accurate spec sheet, several details commonly asked about this class of press are not published for the NSP-20, and we will not estimate them. The listing does not state ram stroke, ram travel, throat depth, working height range, the number of bed height positions, bed plate dimensions or quantity, whether a pressure gauge is fitted, shipping weight, or any certification or listing mark. It also does not state assembly requirements or what ships in the carton beyond the press itself. If any of those points is decisive for your application — particularly stroke and bed plate size — contact us before ordering and we will confirm against the manufacturer's documentation rather than publish a number we cannot source.

Key features

20 ton capacity — rated capacity as published by the manufacturer
Manually driven — hand-operated ram, no electrical or air supply needed to run it
Built for bearing work — the manufacturer describes it as great for pressing bearings
21 ½ between uprights — the clear working span available for your part and fixtures
25 ½ wide x 22 long base — compact rectangular footprint for a shop press of this capacity
60" overall height — fits under typical shop ceilings and stays at a workable eye level

Specification Table

NSP-20 · Triumph
Model	NSP-20
Type	Shop Press
Capacity	20 Ton
Operation	Manually driven
Measurement Between Uprights	21 ½
Base Measurement	25 ½ wide x 22 long
Overall Height	60"

Compare models

	NSP-20 20 Ton Manual Shop Press THIS	NSP-30 30 Ton Air Driven Shop Press
Capacity	20 Ton	30 Ton
Operation	Manually driven	Air driven
Measurement between uprights	21 ½	26
Base measurement	25 ½ wide x 22 long	38 wide x 24 long
Price	$1,100.00	$1,865.00
	Viewing	Check ›

Specs from Triumph manuals. Prices update live and reflect current promotions.

FAQ about this model

How much space is there between the uprights on the NSP-20?
The measurement between uprights is 21 ½. That span is the working limit for the part plus any bed plates or support fixtures you place in the press.

How much floor space does this press take up?
The base measures 25 ½ wide x 22 long. Allow additional clearance around that footprint for loading parts and operating the handle.

Will it fit in a garage with a standard ceiling?
Overall height is 60", so ceiling clearance is not usually a limiting factor in a residential garage or a standard shop bay. Confirm the height against any low overhead obstructions such as door tracks or lighting.

Does the NSP-20 need electrical power or compressed air?
No. The press is specified as manually driven, so no electrical circuit and no air supply are required to operate it. No power source is listed for this model.

What is the rated capacity?
20 tons. The manufacturer does not publish a pound rating for this model, so we do not list one.

Is this press suitable for pressing bearings?
Yes — the manufacturer specifically describes the NSP-20 as a 20 ton shop press that is great for pressing bearings. Verify that your part fits within the 21 ½ span between uprights.

What is the ram stroke and how many bed positions does it have?
Those figures are not published for the NSP-20, so we do not list them. Contact us before ordering if stroke length or bed plate size is critical to your application.

How much does the NSP-20 cost?
The NSP-20 is $1,295 shipped to your address.

Shipping & Returns

We offer standard 1-5 business day shipping (following dispatch) via LTL Freight, FedEx, UPS, DHL, or USPS. Orders typically process in 1-2 business days (starting the following business day). Shipping rates are usually calculated at checkout; however, we reserve the right to provide custom shipping quotes for oversized or specialized equipment.

60-DAY NO-HASSLE REFUNDS AND RETURNS

If there’s an issue with your product, we make refunds and returns quick and easy.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused or unused, with tags, and in its original packaging. To contact us, email info@vovlift.com

More information on shipping and returns can be found here.

Warranty

Triumph Limited Warranty. Triumph covers parts and product defects for one (1) year; labor is not included. Hydraulic cylinders carry a 30-day full warranty, after which a seal kit is supplied for cylinder service. Rubber lifting pads are not covered. The warranty applies to the original purchaser with proof of purchase.

FAQ

How long will it take for my order to ship? When will I receive it?
Most orders are processed within 1-2 business days, starting the business day following the date the order was placed. Once dispatched, standard shipping typically takes an additional 1-5 business days (starting the business day after shipment).

In total, you can generally expect your order to arrive within 2-7 business days. Please note that larger equipment, oversized items, or specialized products may require additional handling and transit time.

Read more about our Shipping Policy.

Which payment methods do you accept?
We are committed to ensuring a safe shopping experience on our Website. We place the highest value on your privacy and security.

We accept all major credit cards and payments made via Visa, Mastercard, American Express, Discover, Diners Club, Shop Pay, Apple Pay, Google Pay, Meta Pay, and PayPal.

What is your return policy?
Vovlift accepts returns within 60 days from the delivery date. To be eligible for a return, your item must be unused, in the same condition that you received it, and in its original packaging. Please include the original order confirmation or packing slip when returning an item.

Please read our Return Policy.

What if my product is damaged?
If you receive a damaged or defective item, please contact us immediately at info@vovlift.com with details and photos of the issue. We will work to resolve the problem promptly.

How do I place an order?
To place an order online, simply click “Add To Cart” on your preferred product and proceed to checkout. Enter your shipping and billing information and complete checkout.

How do I know when my order will ship?
Once you place your order, you will receive a confirmation email confirmation credit card authorization and shipping/billing information.

We will immediately process your order and you will receive an email confirming your order has shipped with a tracking number once it leaves the warehouse.

If an item goes out of stock, you will be notified via email or phone within one business day. We take great measures to ensure all products listed on our website are in stock, but often times items can quickly sell out due to high demand.

Will you send an order confirmation via e-mail?
An order confirmation message will be sent to the e-mail address you provide us for each order you submit. We recommend that you print and save the e-mail confirmation for your records. Please be sure to enter your e-mail address correctly to ensure that you receive your order confirmation.

Can I change my order?
Yes, you can change your order at no cost by simply emailing us at info@vovlift.com.

TRIUMPHAutomotive Shop Equipment

Shop Equipment That Earns Its Floor Space

Triumph builds the machines a working bay actually runs on: two-post and four-post vehicle lifts from 7,000 to 50,000 lb, truck and passenger tire changers, wheel balancers, rolling bridge jacks, shop presses and oil drains.

The lifts are manufactured to ISO 9001 quality standards and are CE certified. Every machine ships with a one-year parts warranty, and you can pick your order up yourself at one of three US warehouses instead of paying freight.

View our Triumph Equipment Collection

Certified Build

Manufactured to ISO 9001 quality standards and CE certified — not a claim, a certification.

High-Performance Design
Rigorous Testing Process
Advanced Technical Solutions

Capacity For Any Bay

From a 7,000 lb portable two-post to a 50,000 lb four-post — passenger cars through heavy trucks.

Reinforced Steel Carriages
Industrial-Strength Components
Handles Daily Shop Abuse

Pick Up Or Ship

Collect at Columbus OH, Fort Worth TX or North Las Vegas NV and skip the freight cost.

Strategic US Distribution Hubs
Rapid Delivery Nationwide
Expert Support in the USA

One-Year Parts Warranty

Parts and defects covered for a full year, with a seal kit supplied for cylinder service after 30 days.

Strict Quality-Control Process
Professional-Grade Standards
Unbeatable Value & Performance

Excellent

Based on 27 reviews

Trustpilot

5 stars as always

5 stars as always. Our school used this store again and once again everything went great.

Joann Alford, December 17, 2024

We ordered Makinex dual pressure…

We ordered Makinex dual pressure cleaner and Movexx electric tug. Everything came fast in great condition. We will back.

Ronald Jones, December 17, 2024

I recived package than expect

I recived package than expect. Good store.

Jacob Hollingsworth, December 5, 2024

Second purchase and excellent service

Second purchase and excellent service. Highly recommend.

Allen Martin, December 16, 2024

I’m very impressed with the quality and…

I’m very impressed with the quality and reliability of the equipment. Highly recommend Vovlift for anyone in need of industrial machinery!

James Jones, October 10, 2024

Everything was good

Everything was good, only 4 stars because I recived wrong model but everything go fixed fast.

Max Halsted, October 10, 2024

If you are looking Apollolift products…

If you are looking Apollolift products in good price, this is right place. 5 stars.

Dan Friddle, August 21, 2024