FREE SHIPPING ON SELECTED BRANDS & NO SALES TAX
FREE SHIPPING ON SELECTED BRANDS & NO SALES TAX
Take $100 Off Orders Over $2000! | CODE
$100 OFF CODE
WELCOME
Mail:info@vovlift.com
Phone: +1 (307) 441-5529
Mail:info@vovlift.com
Mon to Fri (10 AM to 6 PM) ET
Fortisky Technologies builds wheel service equipment and car lifts for auto repair shops, tire shops, car dealers, fleets, body shops and hobby garages. This Fortisky collection brings together their tire changers, wheel balancers, changer-and-balancer combos, two-post and four-post lifts and scissor lifts, each with a Fortisky model number and a full spec table. Use the guide below to match rim range, power supply and lift capacity to your bay. Pick up at the Fortisky warehouse in Virginia Beach, VA, or choose freight delivery within the lower 48 states.
The Fortisky FWB-8823 is a 2D self-calibrating wheel balancer with laser positioning for rims up to 30", wheels up to 39" (1,000 mm) in diameter an...
View full detailsThe Fortisky FWB-95B is a wheel balancer for rims up to 26", wheels up to 1,000 mm in diameter and 70 kg, with ±1 g balancing precision on 110V / 6...
View full detailsThe Fortisky FTC-1660 is a dual assist arm tire changer with bead blaster for rims 10"–22" (outside clamping), 12"–24" (inside) and wheels up to 40...
View full detailsThe Fortisky FTC-T2 is a fully automatic leverless center-post tire changer for rims 10"–28" and wheels up to 47" (1,200 mm) in diameter, running o...
View full detailsThe Fortisky FTC-6700 is a fully automatic truck, bus, light truck and car tire changer for rims 14"–42" and wheels up to 59" (1,500 mm) in diamete...
View full detailsThe Fortisky FTC-T8 is a fully automatic leverless center-post tire changer for rims 10"–30" and wheels up to 49" (1,250 mm) in diameter, running o...
View full detailsThe Fortisky FTC-1670 is a tilt-back tire changer with helper arm and bead blaster for rims 14"–26" (outside clamping), 16"–28" (inside) and wheels...
View full details
Fortisky Technologies describes itself as “one of the world’s leading aftermarket manufacturers of wheel service equipment” for auto repair shops, car dealers, fleets, garages, tire shops and body repair shops (Fortisky About Us). Alongside the wheel service machines, the brand makes car lifts. The models in this collection are:
Start with the largest wheel you work on every week, then check the power in your bay.
| Model | Type | Rim range | Max wheel diameter | Power |
|---|---|---|---|---|
| FTC-1660 | Dual assist arm, bead blaster | 10"–22" outside clamp, 12"–24" inside | 40" | 110V |
| FTC-1670 | Tilt-back, assist arm | 14"–26" outside clamp, 16"–28" inside | 47" | 110V |
| FTC-T2 | Fully automatic leverless center-post | 10"–28" | 47" | 220V |
| FTC-T8 | Fully automatic leverless center-post | 10"–30" | 49" | 220V |
| FTC-6700 | Fully automatic truck, bus and car | 14"–42" | 59" | 220V |
The FTC-1660 and FTC-1670 run on 110V / 60Hz / 1-phase power, so they suit shops without a 220V circuit. The FTC-1670 tilts its column back and takes larger rims, up to 28" when clamped from the inside. The leverless FTC-T2 and FTC-T8 need 220V / 60Hz / 1-phase; their center-post design mounts and demounts tires without a crowbar, and Fortisky lists the FTC-T8 for low-, medium- and high-end car and SUV tires. For trucks and buses, the FTC-6700 handles wheels up to 1,102 lb (500 kg) and 59" in diameter.
| Model | Type | Rim size | Max wheel weight | Balancing precision | Power |
|---|---|---|---|---|---|
| FWB-95B | Wheel balancer | up to 26" | 70 kg | ±1 g | 110V |
| FWB-8823 | 2D self-calibrating, laser | up to 30" | 165 lb (75 kg) | ±1 g | 110V |
| FWB-8833 | 3D millimeter-wave radar, laser | up to 30" | 165 lb (75 kg) | ±0.1 g | 110V |
| FWB-5733 | Fully automatic truck and car, lifting cart | 10"–28" | up to 441 lb (200 kg) | ±10 g | 220V |
For passenger cars and light trucks, the choice is mostly about precision and speed. The FWB-8823 and FWB-8833 both list a 7 s measuring time; the FWB-8833 adds 3D millimeter-wave radar measurement and ±0.1 g precision. The FWB-5733 is the truck balancer: its lifting cart helps with heavy wheels, and its main shaft turns at 180 rpm for car wheels and 90 rpm for truck wheels.
Each combo code joins the two model numbers. The 1660-95B is an FTC-1660 with an FWB-95B, the T8-8833 is an FTC-T8 with an FWB-8833, and the 6700-5733 pairs the FTC-6700 truck changer with the FWB-5733 truck balancer. The FTC-1660, FTC-1670 and FTC-T2 each come with the FWB-95B, FWB-8823 or FWB-8833; the FTC-T8 comes with the FWB-8823 or FWB-8833. A combo puts both machines in one order, and each combo page lists both spec tables. Check power for both machines: in the T2 and T8 combos the changer needs 220V while the balancer runs on 110V, so plan both circuits.
| Model | Type | Capacity | Max lifting height |
|---|---|---|---|
| FL-100GX | Two-post, base plate | 10,000 lb | 75" |
| FL-100TX | Two-post, overhead | 10,000 lb | 74.8" |
| FL-120GX | Two-post, base plate | 12,000 lb | 75" |
| FL-120LX | Two-post, overhead | 12,000 lb | 75" |
| FL-120TX | Two-post, overhead, 3.0 kW motor | 12,000 lb | 74.80" |
| FL-120AX | Two-post, asymmetrical | 12,000 lb | 74.8" |
| FL-90PL | Four-post parking lift | 9,000 lb | 78.74" |
| FL-110AL | Four-post alignment lift with 7,000 lb rolling jack | 11,000 lb | 70.87" |
| FSL-MR80 | Mid-rise scissor | 8,000 lb | 47" |
| FSL-FR90 | Full-rise scissor | 9,000 lb | 72" |
All six two-post lifts have a single-point lock release, run on 220V and list a lifting time of 50–60 s. Measure your bay before you choose. The 10,000 lb models list an inner column width of 109.80" and a drive-thru clearance of 98.40"; the symmetrical 12,000 lb models list 118.11" and 106.30". The asymmetrical FL-120AX is the narrowest, at 100" between columns and 87.60" drive-thru. Fortisky does not list an overall column height for the overhead models on our pages, so call us to confirm ceiling clearance before you order one.
The four-post FL-90PL suits parking and storage, with a platform length of 117.17". The FL-110AL is built for alignment work and includes a 7,000 lb rolling jack. The scissor lifts fit shared bays and lower ceilings: the FSL-MR80 raises 8,000 lb to 47", and the full-rise FSL-FR90 raises 9,000 lb to 72". The FSL-FR90 also needs shop air at 0.6–0.8 MPa. Have a qualified installer check the concrete and anchoring against the installation manual before first use.
Warranty comes from the manufacturer. Fortisky wheel service equipment is warranted for one year on all operating components against defects in material and workmanship (Fortisky Warranty Policy in General). Fortisky lifts carry a three-year structural warranty on arms, columns, carriages, legs, overhead beam, tracks, cross rails, top rail beam, swivel pins and uprights, plus a limited two-year warranty to the original purchaser (Fortisky Warranty Policy for Lifts). The lift warranty does not cover wear parts such as cables, slider blocks, chains, rubber pads and pulleys, or on-site labor. Warranty claims need the model and serial number of the machine, and Fortisky asks for missing parts to be reported within 72 hours, so check the shipment as soon as it arrives.
Every Fortisky product page gives you two options: pick up at the Fortisky warehouse in Virginia Beach, VA, or freight delivery for the flat fee shown on that page. Fortisky ships freight only within the lower 48 states (Fortisky shipping policy), so we can’t deliver Fortisky equipment to Alaska, Hawaii or US territories. The buyer is responsible for unloading, and a forklift or similar equipment is needed. Inspect every crate before you sign and note any damage on the delivery receipt, because freight damage is not a warranty issue. Questions before you order? Call +1 (307) 441-5529, Monday through Friday (9 AM to 5 PM) EST.
Yes. Fortisky Technologies Inc. makes wheel service equipment and car lifts, and describes itself as one of the world’s leading aftermarket manufacturers of wheel service equipment for auto repair shops, car dealers, fleets, garages, tire shops and body repair shops. Every product in this collection has a Fortisky model number (FTC, FWB, FL or FSL) and a full spec table you can check before you buy.
Prices currently start from about $1,749 for a tire changer (FTC-1660), $909 for a wheel balancer (FWB-95B), $2,249 for a changer-and-balancer combo (1660-95B), $2,099 for a two-post lift (FL-100GX), $3,099 for a four-post lift (FL-90PL) and $2,799 for a scissor lift (FSL-MR80). These are warehouse pickup prices; freight delivery adds the flat fee shown on each product page.
The FTC-6700 truck, bus and car tire changer takes rims from 14" to 42", wheels up to 59" in diameter and up to 1,102 lb (500 kg), on 220V power. For passenger cars, the leverless FTC-T8 handles 10"–30" rims and the FTC-T2 10"–28". The 110V FTC-1670 clamps rims up to 28" from the inside.
Fortisky warrants its wheel service equipment for one year on all operating components against defects in material and workmanship. The warranty does not cover ordinary wear, abuse, misuse, shipping damage, improper installation or lack of required maintenance, and claims need the model and serial number.
Fortisky lifts have a three-year structural warranty on arms, columns, carriages, legs, overhead beam, tracks, cross rails, top rail beam, swivel pins and uprights, plus a limited two-year parts warranty for the original purchaser. Wear parts such as cables, slider blocks, chains, rubber pads and pulleys, and on-site labor, are not covered.
Yes. On each product page you can choose pickup at the Fortisky warehouse in Virginia Beach, VA, or freight delivery for the flat fee shown on that page. Call +1 (307) 441-5529 if you have questions before you order.
Fortisky ships freight only within the lower 48 states, so delivery to Alaska, Hawaii or US territories is not available. The buyer is responsible for unloading, so have a forklift or similar equipment ready, and note any damage on the delivery receipt before you sign.
