What lifting capacities are available?
Three models are offered, rated at 250 lb, 500 lb and 1,000 lb. These are model numbers VS-ECH-2-1PH, VS-ECH-5-1PH and VS-ECH-10-1PH respectively. Choose the model whose rating exceeds the heaviest load you plan to lift, counting the weight of any sling, hook block or below-hook attachment you add, not just the part itself.
How much does each model cost?
Prices range from $2,898.97 to $3,220.19 depending on capacity. The 250 lb VS-ECH-2-1PH is $2,898.97, the 500 lb VS-ECH-5-1PH is $2,977.75, and the 1,000 lb VS-ECH-10-1PH is $3,220.19. Those figures are for the hoist itself; the product data here does not list freight, mounting hardware, trolleys or other accessories.
What does variable speed do for me compared with a fixed-speed hoist?
It lets the operator raise and lower at a controlled rate instead of one fixed speed. That matters when you are spotting a load onto a fixture, into a machine, or through a tight opening. Slower movement reduces load swing and gives finer placement. The data shown here does not list the speed range, so check the manual for exact figures.
What power supply do these hoists need?
All three models carry the 1PH designation, indicating single-phase power rather than three-phase. The specification data shown here does not list voltage, amperage or duty cycle, so confirm those against the manufacturer's manual before you order. Have a licensed electrician verify your circuit, disconnect and overcurrent protection suit the unit before installation.
Where are they made, and what warranty comes with them?
They are made in the USA by Vestil Manufacturing and carry a 1-Year Limited warranty. That warranty applies to all three capacities in this range. The specification data here does not detail what the limited warranty covers or excludes, so request the written warranty terms before purchase if that affects your decision.
Who is responsible for inspecting and maintaining an electric chain hoist?
The employer is, under US workplace rules. Overhead hoists fall under the Occupational Safety and Health Administration (OSHA) regulations and the American Society of Mechanical Engineers (ASME) B30.16 standard for overhead hoists, which require a written periodic inspection program and operation by trained personnel. Inspection intervals and load test data are not included in the specifications shown here.
