How much can these gantry cranes lift?
All three models are rated at 2,000 lb. The capacity range across the series is 2,000 to 2,000 lb, so choosing a longer beam does not reduce what the crane will carry. Confirm your heaviest load, including the hoist, rigging, and any lifting attachment, stays within that 2,000 lb rating before ordering.
What beam lengths are available?
Three beam lengths are offered: 8', 10', and 12'. The models are FPG-A-20-8, FPG-A-20-10, and FPG-A-20-12. Beam length is the only difference between them, since all three share the same 2,000 lb capacity. Choose based on the span you need to cover and the floor space available in your work area.
How much do they cost?
Prices start at $2,605.02 and run to $2,936.32 depending on beam length. The FPG-A-20-8 is $2,605.02, the FPG-A-20-10 is $2,719.51, and the FPG-A-20-12 is $2,936.32. Freight is quoted separately and is not included in these figures.
Where are they made, and what warranty comes with them?
They are made in the USA by Vestil Manufacturing and carry a 1-Year Limited warranty. Vestil is the manufacturer of record for the full FPG-A series, so replacement parts and warranty claims run through Vestil. Warranty terms cover the crane as supplied; hoists and rigging bought separately follow their own manufacturers' terms.
Who is this crane a good fit for, and who should look at something else?
It suits shops and work areas that need a movable 2,000 lb lifting point rather than a fixed overhead system. The aluminum frame keeps the unit light enough to reposition by hand. If your loads exceed 2,000 lb, or you need to lift continuously in one fixed location, a heavier steel gantry or a permanent overhead crane is the better choice.
What should I know about inspection and safe use?
Portable gantry cranes used in US workplaces fall under OSHA's overhead and gantry crane rules, which require periodic inspection and that the rated capacity stay marked and legible. Keep the crane on a level, sound floor, do not move it with a suspended load, and inspect the beam, casters, and connections before each shift.
