Phone: +1 (307) 441-5529
Mail:info@vovlift.com
Mon to Fri (10 AM to 6 PM) ET
FREE SHIPPING ON SELECTED BRANDS & NO SALES TAX
FREE SHIPPING ON SELECTED BRANDS & NO SALES TAX
Take $100 Off Orders Over $2000! | CODE
$100 OFF CODE
WELCOME
Phone: +1 (307) 441-5529
Mail:info@vovlift.com
Mon to Fri (10 AM to 6 PM) ET
Parts and options are the factory add-ons that adapt a base machine to your dock, your aisle and your product. This collection carries Vestil parts and options, including dock leveler curb angle sets in eight sizes from 6x5 to 7x10, hydraulic box dumper gates for 36, 48 and 60 dump heights, scale and digital printer options, 24V power and powered lift upgrades, pneumatic tire and stationary leg conversions, and pole attachments for manual stackers. Most are model-specific, so confirm fit against your unit's model and serial number before ordering.
The Vestil SWA-60-AW-SCL is an optional digital scale for use with the Vestil SWA-60-AW auto-wrap stretch wrap machine. Vestil notes that the scale...
View full detailsThe Vestil HBD-SLC is a factory-installed safety light curtain option for Vestil electric/hydraulic box dumpers (HBD). Vestil explains that the pho...
View full detailsThe Vestil HBD-GATE-60 is a steel safety gate for Vestil electric/hydraulic box dumpers (HBD), 60" dump height version. Vestil states the gate must...
View full detailsThe Vestil HBD-GATE-48 is a steel safety gate for Vestil electric/hydraulic box dumpers (HBD), 48" dump height version. Vestil states the gate must...
View full detailsThe Vestil HBD-GATE-36 is a steel safety gate for Vestil electric/hydraulic box dumpers (HBD), 36" dump height version. Vestil states the gate must...
View full detailsThe Vestil SCALE-S-CFT-PRINTER is an optional plastic electronic digital printer for Vestil electronic digital floor scale models. Vestil lists it ...
View full detailsThe Vestil PORTABLE-SEMI is a factory-installed manual semi-portability option for Vestil electric hydraulic scissor lift tables. Vestil states tha...
View full detailsThe Vestil SY-PNTR is a factory-installed pneumatic tire option for Vestil yard ramps. Vestil describes it as an optional pneumatic tire option for...
View full detailsThe Vestil CAS-78 is a steel curb angle set for 7 ft. x 8 ft. Vestil dock levelers. Vestil explains that a dock leveler curb angle is installed aro...
View full detailsThe Vestil CAS-710 is a steel curb angle set for 7 ft. x 10 ft. Vestil dock levelers. Vestil explains that a dock leveler curb angle is installed a...
View full detailsThe Vestil CAS-610 is a steel curb angle set for 6 ft. x 10 ft. Vestil dock levelers. Vestil explains that a dock leveler curb angle is installed a...
View full detailsThe Vestil CAS-68 is a steel curb angle set for 6 ft. x 8 ft. Vestil dock levelers. Vestil explains that a dock leveler curb angle is installed aro...
View full detailsThe Vestil CAS-76 is a steel curb angle set for 7 ft. x 6 ft. Vestil dock levelers. Vestil explains that a dock leveler curb angle is installed aro...
View full detailsThe Vestil CAS-75 is a steel curb angle set for 7 ft. x 5 ft. Vestil dock levelers. Vestil explains that a dock leveler curb angle is installed aro...
View full detailsThe Vestil CAS-66 is a steel curb angle set for 6 ft. x 6 ft. Vestil dock levelers. Vestil explains that a dock leveler curb angle is installed aro...
View full detailsThe Vestil CAS-65 is a steel curb angle set for 6 ft. x 5 ft. Vestil dock levelers. Vestil explains that a dock leveler curb angle is installed aro...
View full detailsThe Vestil VWS-AA-PRP is a steel pole attachment for the Vestil manual hand winch stacker (VWS). Vestil describes the pole as a user-friendly way o...
View full detailsThe Vestil VHPS-NM-AA-PRP is a steel pole attachment for the Vestil VHPS narrow mast stacker models. Vestil describes the pole as a user-friendly w...
View full detailsThe Vestil FHA-STLO-RF is a field-installed set of four steel stationary legs for Vestil fixed height aluminum gantry crane models (FHA). Vestil st...
View full detailsThe Vestil LM-FP is a factory-installed steel fork pocket option for Vestil lift boom models. Vestil describes it as larger fork pockets to better ...
View full detailsThe Vestil VHPS-DK is a steel removable platform for Vestil VHPS hand pump stacker models. Vestil describes it as a removable platform hand pump 42...
View full detailsThe Vestil AHS-STLO-RF is a field-installed kit of four steel stationary legs for Vestil steel gantry cranes with 2,000 lb to 8,000 lb capacity (no...
View full detailsThe Vestil EPFC-HC is a plastic power lift hand control for Vestil fully powered electric floor crane models (EPFC). It has four standard pushbutto...
View full detailsThe Vestil SY-YEL is a factory-installed yellow curb paint option for Vestil yard ramps. Vestil describes it as optional yellow curb paint, and the...
View full detailsThis is an options catalog, not a machine catalog. Every item here is built to be added to a Vestil base unit — a dock leveler, a hydraulic box dumper, a stretch wrap machine, a lift table, a manual stacker or a lift truck — and most are not usable on their own. Several titles repeat because the same option, such as the four-leg stationary leg kit or the power lift option with hand control, is engineered separately for different base models. That is the thing to get right when ordering: options are matched to a model, not to a category.
Approval matters as much as fit. OSHA 1910.178(a)(4) states that modifications and additions which affect capacity and safe operation shall not be performed without the manufacturer's prior written approval, and that capacity, operation and maintenance instruction plates, tags or decals shall be changed accordingly. ANSI/ITSDF B56.1, the safety standard for low lift and high lift industrial trucks, carries the same requirement. Ordering the factory option built for your model is the clean way to satisfy it.
Curb angle sets are the structural steel angles that form and protect the edges of a leveler pit and give the leveler frame something to sit against. This collection lists eight sizes — 6x5, 6x6, 6x8, 6x10, 7x5, 7x6, 7x8 and 7x10 — corresponding to the nominal width and length of the leveler they frame. Treat them as civil work rather than as an accessory: they are set before the concrete is poured, and retrofitting angles into a finished pit means breaking out and repouring. Get the pit drawing and the angle set specified in the same conversation.
The 6In curb height option, the yellow curb paint option and the loading light fan option all address the working face of the dock. Curb height changes the approach geometry between trailer bed and dock floor; paint is about making the edge visible to a driver working in a dark trailer; the light and fan combination addresses visibility and air movement inside the trailer itself. OSHA 1910.26 requires that dockboards be capable of supporting the maximum intended load, be secured in position, and, unless the design or condition makes it unnecessary, have means to prevent transfer vehicles from running off the edge. OSHA 1910.178(k)(1) requires that the brakes of highway trucks be set and wheel chocks placed under the rear wheels before powered industrial trucks board them.
A large share of this collection converts manual actuation to powered, or changes how a unit moves. The 24V power option and the rotation option for HDC models with 24V DC power replace hand effort with a battery circuit. The power lift option with hand control, the powered lift option with solid platform and the removable platform hand pump stack option do the same job on lift and stacking equipment. Decide by duty cycle rather than by price: a few lifts per shift rarely justifies the conversion, while repeated cycling all day usually does, both for throughput and for operator strain.
Battery-powered options bring a charging area with them, and that area has rules. OSHA 1910.178(g) requires facilities for flushing and neutralizing spilled electrolyte, fire protection, protection of charging apparatus from damage by trucks, and adequate ventilation for dispersal of fumes from gassing batteries. NFPA 505 covers fire safety requirements and the type designations for powered industrial trucks used where hazardous atmospheres may be present; review it before putting an electric option into a classified area.
Mobility options answer a different pair of questions: does the unit need to travel, and does it need to stay put under load? The pneumatic tire option suits rough exterior yards, expansion joints and dock plates, while harder tread rolls with less effort on smooth interior concrete. The manual semi-portability option allows occasional relocation without turning the unit into a full mobile cart. The lift truck option with manual floor lock holds position while a load is transferred on or off. The four-leg stationary leg options, offered in both factory and field install versions, remove mobility entirely in exchange for a fixed, stable work height. The anti-skid steel treadplate option matters anywhere operators step onto the deck, and the Lift Master fork pocket option at 8.25x4.25 determines whether a truck can pick the unit at all.
The hydraulic box dumper gate options are offered for 36, 48 and 60 dump heights and retain loose product and packaging as the container rotates through the dump. Match the gate to the dumper's dump height rather than picking the largest available. The HBD safety light curtain option adds presence sensing to the dump zone. OSHA 1910.212(a)(1) requires one or more methods of machine guarding to protect operators from hazards such as point of operation, ingoing nip points and rotating parts. ANSI B11.19 sets performance requirements for safeguarding devices, including presence-sensing devices and the safe distance at which they must be positioned so that motion stops before an operator can reach the hazard. A light curtain is a safeguarding device, not a universal replacement for a physical guard.
The stretch wrap machine scale option weighs the load on the turntable while it wraps, and the scale option with digital printer adds a printed record at the machine. The real gain is one fewer material move, because the pallet does not travel to a floor scale after wrapping. Before assuming the weight can be used commercially, note that NIST Handbook 44 sets the specifications, tolerances and requirements for commercial weighing devices in the US, and devices used to buy or sell by weight generally must be a type-approved model, installed and sealed under your state weights and measures program. Our listing does not state a legal-for-trade classification, so ask first if you invoice customers by weight.
| Option family | What it changes | Confirm before ordering |
|---|---|---|
| Curb angle sets, curb height, paint, light and fan | Pit construction and the working face of the dock | Leveler nominal size, pit drawing, whether concrete is already poured |
| 24V power, rotation, power lift, hand control, solid platform | Manual actuation becomes powered | Base model and serial, charging area, cycles per shift |
| Pneumatic tire, semi-portability, floor lock, stationary legs | Whether the unit travels and how it holds position | Floor surface, travel distance, field versus factory install |
| Box dumper gates and light curtain | Load retention and operator guarding | Dump height on the data plate, control interface, safety review |
| Scale and digital printer | Weight capture and printed records | Whether you bill by weight and your state requirements |
Two habits prevent most ordering mistakes. First, work from the base unit's data plate, not from a description, because compatibility is defined at the model level and near-identical machines take different kits. Second, settle factory versus field install before the order is placed. Factory install removes fit-up labor and fit risk but cannot be added after the machine is built, while field install is the only route for equipment already in service — and that work falls under OSHA 1910.147 lockout/tagout.
Vestil parts and options. The mix covers dock leveler curb angle sets in eight sizes from 6x5 to 7x10, hydraulic box dumper gates for 36, 48 and 60 dump heights, an HBD safety light curtain option, stretch wrap machine scale and digital printer options, 24V power and powered lift upgrades, pneumatic tires, floor locks, stationary legs and manual stacker pole attachments.
Assume it will not. Everything here is a Vestil factory option built for a specific Vestil base model, and several titles repeat because the same option is engineered separately for different models. OSHA 1910.178(a)(4) and ANSI/ITSDF B56.1 both require the manufacturer's prior written approval before modifications or additions that affect capacity or safe operation, so order against your model and serial number.
Order the set matching your leveler's nominal size. This collection lists 6x5, 6x6, 6x8, 6x10, 7x5, 7x6, 7x8 and 7x10. Curb angles form and protect the pit edges, so they have to be specified before the concrete is poured; adding them to a finished pit means breaking out and repouring. Confirm the pit drawing with your leveler supplier first.
Factory install means the four legs are fitted on the production line before the unit ships. Field install means the kit arrives loose for your maintenance crew or a millwright to fit. Factory install avoids installation labor and fit-up risk but has to be decided when the order is built. Field install is the only option for a unit already in service, and that work falls under OSHA 1910.147 lockout/tagout.
That depends on how the machine is guarded and how operators work around it. OSHA 1910.212(a)(1) requires one or more methods of machine guarding to protect operators from hazards such as point of operation, nip points and rotating parts. ANSI B11.19 sets performance requirements for safeguarding devices, including presence-sensing devices and the safe distance they must be mounted at. Have your safety lead assess the specific installation.
Match the gate to the dumper's dump height. This collection lists gate options for 36, 48 and 60 dump heights. The gate retains loose product and packaging while the container rotates, so it belongs with the dumper it was engineered for rather than being chosen by preference. If the dumper is already installed, read the dump height from the unit's data plate before ordering.
Our listing does not state that, so do not assume it. NIST Handbook 44 sets the specifications and tolerances for commercial weighing devices in the US, and devices used to buy or sell by weight generally must be a type-approved model, installed and sealed under your state weights and measures program. If you only need shipping weights for internal records, that requirement does not apply.
It can. Attachments, platforms and power conversions change unit weight, load center and sometimes stability. OSHA 1910.178(a)(4) prohibits modifications and additions affecting capacity and safe operation without the manufacturer's prior written approval, and requires capacity, operation and maintenance plates, tags or decals to be changed accordingly. ANSI/ITSDF B56.1 carries the same rule. Make sure the revised data plate comes with the option.
Enjoy free shipping on selected brands & no sales tax!
Inspect your delivery and note any damage on the delivery receipt. Damage claims follow our Return & Refund Policy.
Speak to a sales rep or forklift expert.
We use encrypted SSL security to ensure that your credit card information is protected.
+ 30-day coverage on wearable items (tires, bulbs, seals).
Wear items (pads, pins, lifting bails) excluded.
Select items (auger drives, forks, grapples, buckets, mixers) carry 6-month–2-year terms.