What load can the PCT-5 pail carrier handle?
It is rated at 200 lb. That rating has to cover the pail and its contents together, so weigh a filled pail before lifting rather than working from a nominal figure. Never exceed 200 lb, including any shock loading from starting or stopping the hoist. If your filled pails come in heavier than that, this model is not the right choice.
Does it need electrical power or compressed air?
No. The PCT-5 is manually operated, so there is no power or air supply to run to it. The lifting is done by the overhead hoist or crane it hangs from, and the carrier itself holds and turns the pail by hand. Your only site requirements are lifting equipment rated for the load and clearance to maneuver it.
How is the unit actually operated?
By hand, with no motor or controls. Vestil lists the product type as a hoist mounted pail carrier and rotator, and the model description calls it a manual overhead pail dispenser, so the operator positions the pail and works the rotating action manually while the hoist carries the weight. The specifications do not state tilt angle or handle type; the Vestil manual covers those details.
How many versions are there, and what does it cost?
There is one model, the PCT-5, at $516.76. Vestil describes it as a manual overhead pail dispenser rated at 200 lb. Because there are no capacity, size, or finish variants in this line, specifying it is simple: confirm that 200 lb covers your filled pails and the model number is the only decision left.
What warranty does it carry and where is it made?
It comes with a 1-Year Limited warranty and is made in the USA by Vestil Manufacturing. The listed specifications give the warranty length only; the exclusions and claim process are set by Vestil, so request the full warranty document before ordering if those terms matter to you. Freight, lead time, and return terms are quoted separately.
What maintenance does it need?
Very little, since there is no motor, pump, or hydraulic system to service. Upkeep is regular inspection plus keeping the moving parts clean and turning freely, and removing the unit from service if anything is bent, cracked, or worn. As equipment that hangs beneath a hoist hook, it falls under the below-the-hook lifting devices addressed by ASME standards, and OSHA requires employers to keep such equipment in safe working condition. No certification is listed in these specifications.
