How much weight can this lift hold?
The capacity is 400 lbs, evenly distributed across the platform. That distribution matters: the rating assumes the load is spread over the 4' x 6' deck rather than concentrated in one corner or at one edge. Bins, totes, and similar items that spread out work well. Single dense items that load one spot are not what this rating covers.
What ceiling height do I need?
This model is built for ceiling heights of 11' to 14', with a maximum drop of 11'. Measure from the finished floor to the ceiling or joist where the unit will mount before ordering. Below 11', you will not use the full drop range. Above 14', this unit is not the right choice and a different drop length is needed.
How is the platform raised and lowered?
It uses a drill powered lift system, so a handheld drill drives the platform up and down instead of a hand crank or wired motor. There is no electrical hookup listed in the specifications. Note that the specifications do not list a drill as part of the package, so plan on using one you already own.
What size is the platform and what fits on it?
The platform measures 4' x 6', which is 24 square feet of deck. That footprint suits stacked storage bins, seasonal boxes, luggage, and similar bulk items in a garage or shop. Check both the footprint of your load and the total weight against the 400 lb rating, since either one can be the limiting factor.
How difficult is installation?
Installation is described as a simple setup, and instructions are included with the unit. The work involves mounting the frame overhead, so you need safe access to solid structure at your ceiling and a helper for handling the assembly. If you are unsure about the structure you are mounting to, have the mounting points assessed before you install.
How is it built and where is it made?
The frame is heavy duty steel, and the unit is manufactured in the United States. Steel construction is what supports the 400 lb rated load over the 4' x 6' platform. For maintenance, keep the platform loaded within its rating, keep the travel path clear of obstructions, and periodically check that mounting hardware remains tight.
