How much weight can the 4'x6' E-Z Lift hold?
The weight capacity is 400 lb. That figure covers the total load sitting on the platform, so add up your containers and their contents before loading rather than estimating. The platform itself measures 4 ft by 6 ft, which determines how far you can spread that load. Do not exceed 400 lb on the deck.
Will it work with my garage ceiling height?
It is listed for ceiling heights of 8'–11', and up to 12 ft. The vertical drop range is 8 ft, meaning the platform travels up to eight feet down from its raised position. Measure floor to finished ceiling before ordering, and check the travel path for obstructions such as garage door tracks, openers, or light fixtures.
How do you raise and lower the platform?
It uses a drill powered lift and lower mechanism, so you drive the unit with a power drill instead of cranking it by hand. The same drill raises the platform into storage position and lowers it for access. The specifications do not state whether a drill is supplied, so confirm that before ordering if you do not already own one.
What size items fit on the platform?
Anything within the 4 ft by 6 ft footprint, as long as the total load stays under 400 lb. Items that overhang the edges are not supported by the deck and should not be loaded that way. Measure your bins, cases, or seasonal storage against the 4'x6' platform before you buy so you know what will actually sit flat.
What is the lift made of?
It is heavy duty steel construction and made in the USA. The specifications do not list a finish, coating, or environmental rating, so we cannot tell you how it holds up in an unheated, humid, or coastal space. If corrosion exposure is a concern for your building, check that point with the manufacturer before ordering.
How difficult is the installation?
It is designed for easy install and includes detailed instructions. The specifications do not list the mounting hardware, required joist spacing, or attachment method, so read the instructions against your own ceiling structure before starting. The mounting points have to carry both the steel unit and up to 400 lb of stored load, so the ceiling framing matters.
