What lifting capacities are available?
Three models cover 1,000 lb, 2,000 lb, and 4,000 lb. The CPC-10 is rated 1,000 lb, the CPC-20 is rated 2,000 lb, and the CPC-40 is rated 4,000 lb. Choose the model whose rating meets or exceeds the full weight of the plate being lifted, including any attached hardware. Do not exceed the rated capacity of the clamp you select.
How do I choose between the CPC-10, CPC-20, and CPC-40?
Start with the weight of your heaviest plate and pick the rating above it. The CPC-10 costs $189.55, the CPC-20 costs $254.98, and the CPC-40 costs $333.40. If your loads vary, size to the heaviest one rather than the average. Plate thickness range and jaw opening are not listed here, so confirm those against the plate you intend to lift before ordering.
What comes with the clamp?
Each model ships as a vertical plate clamp with an integral chain, which is what the CPC designation refers to. The chain is the connection point between the clamp body and your hook, sling, or lifting hardware. No crane, hoist, sling, or other rigging is included. You supply the overhead lifting device and any additional hardware needed to connect to the chain.
What is the warranty?
These clamps carry a 1-year limited warranty from Vestil. That is the only warranty term stated in our product data for this line, and it applies to all three models. Coverage details and exclusions are set by Vestil rather than by us. For a specific claim or a copy of the written terms, contact us with your model number and purchase date.
Where are these clamps made?
They are made in the USA by Vestil Manufacturing. All three models in this line — CPC-10, CPC-20, and CPC-40 — come from the same manufacturer. Vestil is the brand of record for the product, so replacement parts and warranty support run through them. Country of origin documentation can be requested if your purchasing process requires it on file.
Who is this type of clamp for, and who should look elsewhere?
Vertical plate clamps suit shops that move steel plate in the vertical position with an overhead hoist or crane. They are a fit for fabrication, steel service, and machine shops handling plate one piece at a time. If you need to lift plate horizontally, handle coils or pipe, or lift loads above 4,000 lb, this line is not the right tool.
