Triumph NTO-20S 20,000 lb Two-Post Auto Lift

Triumph NTO-20S 20,000 lb Two-Post Auto Lift

See more by Triumph

$8,800.00 - $10,500.00

$8,800.00

$8,800.00 - $10,500.00

$8,800.00

In stock

SKU NTO-20Q

Delivery Option: Warehouse Pickup

Pick up at a Triumph warehouse

Quantity

Product Overview

In short

The NTO-20S is an overhead-style two-post automotive lift rated at 20,000 lbs, sized for heavy-duty trucks, vans and dually pickups. It raises on direct-drive cylinders to a maximum lifting height of 74 inches and runs on 220V power.

What the NTO-20S is built to lift

The NTO-20S is rated at 20,000 lbs, which puts it in a different class from the 9,000- and 10,000-lb lifts most general-repair bays run. That rating is what makes it practical for heavy-duty trucks, vans and dually pickups that push past the limits of a standard two-post lift. Maximum lifting height is 74", enough for a technician to work standing under most vehicles, and lowered height is 6" for driving on. Direct-drive cylinders do the lifting, and a full lift takes about 40 seconds. The 20,000 lb rating is the capacity of the lift across both arms, so plan around the total weight of the vehicle rather than a per-arm figure.

Overhead design and drive-thru clearance

This is an overhead-style lift: the crossbar and the safety shut-off sit at the top of the columns instead of in a floor plate, so the drive-through path between the posts stays completely clear. Nothing on the floor catches a low air dam, a floor jack or a rolling toolbox on the way in. The posts stand 124" apart, with a drive-thru width of 113" — that is the number to check against the widest truck or van you service. Overall width is 155", and each column sits on a 21" x 20" base plate. Measure the full 155" footprint against your bay, including room to open doors on a vehicle sitting between the posts.

Ceiling, concrete and power requirements

Two measurements decide whether this lift fits your building. Overall height is 170.5" — roughly 14.2 feet — so the ceiling has to clear the columns and overhead crossbar with working room above a vehicle raised to the 74" lifting height. The floor matters just as much: the lift anchors directly to the slab and requires 6" of concrete rated at a minimum of 4,000 PSI. Verify slab thickness and strength before installation, not after the lift arrives. On the electrical side, the power unit runs on 220V and drives a 3 HP motor, so a 220V supply needs to be available at the installation location before the lift goes up.

Safety systems, included hardware and warranty

A single-point lock release drops both columns' safety locks together, so one control resets the lift instead of two separate releases. An electrical override with automatic safety shut-off stops travel at the top of the stroke. The lift is ISO 9001 manufactured and CE certified. Mounting and anchor hardware and truck adapters are included with every lift, along with an installation instruction manual. Warranty coverage is one year on parts — parts only, no labor. The hydraulic cylinders carry a 30-day full warranty, after which Triumph supplies a seal kit. Rubber lifting pads are not covered under the parts warranty.

Key features

20,000 lb capacity — rated for heavy-duty trucks, vans and dually pickups that exceed standard 9,000- and 10,000-lb lifts
Overhead configuration — crossbar and safety shut-off mount up top, leaving the floor between the posts clear
Direct-drive cylinders — complete a full lift to 74" in about 40 seconds
Single-point lock release — engages and drops both columns' safety locks together
Electrical override with automatic safety shut-off at full height
220V, 3 HP power unit
Free mounting hardware and truck adapters included; ISO 9001 manufactured and CE certified

Specification Table

NTO-20Q · TriumphSKU NTO-20Q
Lifting Capacity	20,000 lbs
Maximum Lifting Height	74"
Overall Height	170.5"
Overall Width	155"
Distance Between Posts	124"
Drive-Thru Width	113"
Lowered Height	6"
Base Plate Size	21" x 20"
Lift Time	40 seconds
Cylinders	Direct-drive
Lock Release	Single-point
Electric Safety Cutoff	Yes
Voltage	220V
Motor	3 HP
Concrete	6" slab, 4,000 PSI minimum
Style	Overhead
Truck Adapters	Included
Certification	ISO 9001, CE
Parts Warranty	1 year, parts only (no labor)
Cylinder Warranty	30 days full, seal kit after

Compare models

	NTO-20S 20,000 lb Two-Post THIS	NT-16 16,000 lb Two-Post	NTO-16 16,000 lb Two-Post Overhead	NTO-15Q 15,000 lb Two-Post
Capacity	20,000 lbs	16,000 lbs	16,000 lbs	15,000 lbs
Maximum Lifting Height	74"	72"	Two-post, overhead	72"
Overall Height	170.5"	7"	72"	142"
Overall Width	155"	142"	142"	102"
Price	$8,800.00	$5,145.00	$5,515.00	$6,595.00
	Viewing	Check ›	Check ›	Check ›

Specs from Triumph manuals. Prices update live and reflect current promotions.

FAQ about this model

What concrete does the NTO-20S require?
A minimum 6" slab rated at 4,000 PSI. The lift anchors directly to the slab, so verify or pour the concrete before installation.

What are the electrical requirements?
The power unit runs on 220V and drives a 3 HP motor. Have 220V available at the lift location before installation.

How much ceiling height do I need?
Overall height is 170.5", about 14.2 feet. Confirm your ceiling clears the columns and overhead crossbar with room to work above a vehicle raised to the 74" maximum lifting height.

Will the NTO-20S fit wide trucks and vans?
The posts stand 124" apart with a 113" drive-thru width, and the overall footprint is 155" wide. Rated capacity is 20,000 lbs across both arms.

What is included with the lift?
Mounting and anchor hardware, truck adapters, and an installation instruction manual are included with every lift.

Is this an overhead or floorplate lift?
Overhead. The crossbar and safety shut-off sit at the top of the columns, which leaves the drive-through path between the posts completely clear.

How fast does it lift, and how do the safety locks work?
A full lift takes about 40 seconds on direct-drive cylinders. A single-point lock release drops both columns' safety locks together, and an electrical override with automatic safety shut-off stops travel at the top of the stroke.

What does the warranty cover?
One year on parts, parts only with no labor. Hydraulic cylinders carry a 30-day full warranty, after which Triumph supplies a seal kit. Rubber lifting pads are not covered.

Is the NTO-20S certified?
It is ISO 9001 manufactured and CE certified.

Shipping & Returns

We offer standard 1-5 business day shipping (following dispatch) via LTL Freight, FedEx, UPS, DHL, or USPS. Orders typically process in 1-2 business days (starting the following business day). Shipping rates are usually calculated at checkout; however, we reserve the right to provide custom shipping quotes for oversized or specialized equipment.

60-DAY NO-HASSLE REFUNDS AND RETURNS

If there’s an issue with your product, we make refunds and returns quick and easy.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused or unused, with tags, and in its original packaging. To contact us, email info@vovlift.com

More information on shipping and returns can be found here.

Warranty

Triumph Limited Warranty. Triumph covers parts and product defects for one (1) year; labor is not included. Hydraulic cylinders carry a 30-day full warranty, after which a seal kit is supplied for cylinder service. Rubber lifting pads are not covered. The warranty applies to the original purchaser with proof of purchase.

FAQ

How long will it take for my order to ship? When will I receive it?
Most orders are processed within 1-2 business days, starting the business day following the date the order was placed. Once dispatched, standard shipping typically takes an additional 1-5 business days (starting the business day after shipment).

In total, you can generally expect your order to arrive within 2-7 business days. Please note that larger equipment, oversized items, or specialized products may require additional handling and transit time.

Read more about our Shipping Policy.

Which payment methods do you accept?
We are committed to ensuring a safe shopping experience on our Website. We place the highest value on your privacy and security.

We accept all major credit cards and payments made via Visa, Mastercard, American Express, Discover, Diners Club, Shop Pay, Apple Pay, Google Pay, Meta Pay, and PayPal.

What is your return policy?
Vovlift accepts returns within 60 days from the delivery date. To be eligible for a return, your item must be unused, in the same condition that you received it, and in its original packaging. Please include the original order confirmation or packing slip when returning an item.

Please read our Return Policy.

What if my product is damaged?
If you receive a damaged or defective item, please contact us immediately at info@vovlift.com with details and photos of the issue. We will work to resolve the problem promptly.

How do I place an order?
To place an order online, simply click “Add To Cart” on your preferred product and proceed to checkout. Enter your shipping and billing information and complete checkout.

How do I know when my order will ship?
Once you place your order, you will receive a confirmation email confirmation credit card authorization and shipping/billing information.

We will immediately process your order and you will receive an email confirming your order has shipped with a tracking number once it leaves the warehouse.

If an item goes out of stock, you will be notified via email or phone within one business day. We take great measures to ensure all products listed on our website are in stock, but often times items can quickly sell out due to high demand.

Will you send an order confirmation via e-mail?
An order confirmation message will be sent to the e-mail address you provide us for each order you submit. We recommend that you print and save the e-mail confirmation for your records. Please be sure to enter your e-mail address correctly to ensure that you receive your order confirmation.

Can I change my order?
Yes, you can change your order at no cost by simply emailing us at info@vovlift.com.

TRIUMPHAutomotive Shop Equipment

Shop Equipment That Earns Its Floor Space

Triumph builds the machines a working bay actually runs on: two-post and four-post vehicle lifts from 7,000 to 50,000 lb, truck and passenger tire changers, wheel balancers, rolling bridge jacks, shop presses and oil drains.

The lifts are manufactured to ISO 9001 quality standards and are CE certified. Every machine ships with a one-year parts warranty, and you can pick your order up yourself at one of three US warehouses instead of paying freight.

View our Triumph Equipment Collection

Certified Build

Manufactured to ISO 9001 quality standards and CE certified — not a claim, a certification.

High-Performance Design
Rigorous Testing Process
Advanced Technical Solutions

Capacity For Any Bay

From a 7,000 lb portable two-post to a 50,000 lb four-post — passenger cars through heavy trucks.

Reinforced Steel Carriages
Industrial-Strength Components
Handles Daily Shop Abuse

Pick Up Or Ship

Collect at Columbus OH, Fort Worth TX or North Las Vegas NV and skip the freight cost.

Strategic US Distribution Hubs
Rapid Delivery Nationwide
Expert Support in the USA

One-Year Parts Warranty

Parts and defects covered for a full year, with a seal kit supplied for cylinder service after 30 days.

Strict Quality-Control Process
Professional-Grade Standards
Unbeatable Value & Performance

Excellent

Based on 27 reviews

Trustpilot

5 stars as always

5 stars as always. Our school used this store again and once again everything went great.

Joann Alford, December 17, 2024

We ordered Makinex dual pressure…

We ordered Makinex dual pressure cleaner and Movexx electric tug. Everything came fast in great condition. We will back.

Ronald Jones, December 17, 2024

I recived package than expect

I recived package than expect. Good store.

Jacob Hollingsworth, December 5, 2024

Second purchase and excellent service

Second purchase and excellent service. Highly recommend.

Allen Martin, December 16, 2024

I’m very impressed with the quality and…

I’m very impressed with the quality and reliability of the equipment. Highly recommend Vovlift for anyone in need of industrial machinery!

James Jones, October 10, 2024

Everything was good

Everything was good, only 4 stars because I recived wrong model but everything go fixed fast.

Max Halsted, October 10, 2024

If you are looking Apollolift products…

If you are looking Apollolift products in good price, this is right place. 5 stars.

Dan Friddle, August 21, 2024