What's the difference between a hot water and electric pressure washer?

Hot water refers to water temperature, while electric refers to the power source. Many units are both electric-powered and hot water-heated. Hot water dissolves grease and oil that cold water cannot, making it ideal for shops, kitchens, and industrial degreasing. Electric drive keeps operation clean and quiet for indoor bays.

How much power does an electric pressure washer need?

Larger electric models here require three-phase power, such as the 10 HP Baldor motor units offered in 460-volt and standard configurations. Smaller 7.5 HP units run on lower draw. Confirm your available voltage and phase before ordering; call +1 (307) 441-5529 for help matching a unit to your electrical service.

Will a surface cleaner work with my pressure washer?

A Whirl-A-Way surface cleaner needs enough GPM and PSI to spin its rotating bar effectively, so match the cleaner diameter to your machine's flow. Larger 24-inch and 30-inch models demand higher output. Smaller 16-inch and 20-inch cleaners pair with mid-range units for driveways, floors, and lots.

What accessories do I need for sewer jetting?

Sewer jetting requires a jetting hose in the length matching your run, such as the 100-foot or 150-foot nylon hoses, plus a drain cleaning laser nozzle sized by orifice. The nozzle's rear-facing jets pull the hose through the line while forward jets cut buildup. Match orifice to your pump output.

Professional Cleaners & Washers for Industrial | Vovlift

Match cleaning power to the job — vovlift.com stocks hot water and electric pressure washers, gas and truck-mount units, surface cleaners, sewer jetting hose, and the fittings that keep them running. Models from BE Power Equipment and Makinex reach up to 4,000 PSI and 5.0 GPM, with Honda engines, Baldor motors, and General or Comet triplex pumps spec'd on every listing.

✓ Hot water, electric & gas configurations · ✓ Full spec sheet on every listing · ✓ Manufacturer warranty · ✓ Insured LTL freight · ✓ Sizing help: +1 (307) 441-5529

Sort by

View as

There are no products matching your search

View all products

Top Picks

Makinex | Dual Pressure Washer | 4,000 PSI | DPW-4000-0A-HU-50

Dual 4,000 PSI output for heavy-duty commercial and industrial cleaning.

$4,607.15

3,000 PSI 5.0 GPM Hot Water Electric Pressure Washer with 10 HP Baldor Motor and General Triplex Pump- 67HD-3

High-flow 3,000 PSI hot water electric with 10 HP Baldor motor.

$8,202.00

4,000 PSI - 4.0 GPM Gas Pressure Washer with Honda GX390 Engine and General Triplex Pump

Honda GX390 gas power for remote sites without electrical hookups.

$1,836.00

2,700 PSI 3.5 GPM 7.5 HP Electric Pressure Washer with Baldor Motor and CP Triplex Pump - B2775E3AHE

Quiet 7.5 HP electric unit for fixed-bay shop cleaning.

$2,125.00

30" Whirl-A-Way Surface Cleaner

30-inch surface cleaner covers large floors and lots fast.

$1,124.00

150' Nylon Sewer Jetting Hose

150-foot jetting hose reaches long drain and sewer runs.

$468.00

How to Choose an Industrial Pressure Washer

What is an industrial pressure washer?

An industrial pressure washer is a high-flow cleaning machine that pairs an engine or electric motor with a triplex pump to deliver pressurized water for heavy soil, grease, and surface prep. Vovlift lists units from 1,000 to 4,000 PSI and 2.0 to 5.0 GPM across hot water, electric, and gas types.

Do you need a hot water or cold water machine?

Choose hot water for grease, oil, and food-processing residue, since heat breaks down bonds cold water leaves behind. Hot water electric units here run 1,000 to 3,000 PSI. For general dirt, mud, and surface prep, a cold water gas or electric machine cleans effectively at lower cost.

How do you match PSI and GPM to the job?

PSI drives cutting force and GPM drives rinse speed and coverage. Higher GPM clears large flat areas faster, so pair a high-flow unit with a Whirl-A-Way surface cleaner for driveways and shop floors. Our range spans 2.0 to 5.0 GPM to fit both detail and volume work.

Electric, gas, or truck mount?

Electric units run clean and quiet for indoor and fixed-bay use, requiring 460-volt or single-phase power depending on model. Gas machines with Honda engines suit remote sites without power. Truck-mount and wall-mount configurations serve mobile contractors and permanent wash stations respectively.