Skip to content
Flag FREE SHIPPING ON SELECTED BRANDS & NO SALES TAX FREE SHIPPING & NO SALES TAX
Tag Take $100 Off Orders Over $2000! | CODE $100 OFF CODE WELCOME

AMGO Extension Platform For PRO-12, PRO-12A (Each) | 41203

Original price $185.00 - Original price $185.00
Original price
$185.00
$185.00 - $185.00
Current price $185.00
In stock
SKU 41203
Insured freight from $275 exact flat rate at checkout
Free warehouse pickup Manning, SC · Dallas, TX
$100 off orders $2,000+ code WELCOME at checkout
No sales tax in most states savings applied at checkout

Product Overview
In short
The AMGO Extension Platform (SKU 41203) is an add-on runway/platform sold individually (each) for the AMGO PRO-12 and PRO-12A four-post lifts, both rated at a 12,000 lb (5,443 kg) lifting capacity. It is built around AMGO's hydraulic, 220V single-phase power unit with mechanical safety locking.

Built for the PRO-12 and PRO-12A

This is an extension platform for the AMGO PRO-12 and PRO-12A four-post lifts, sold each. Both configurations carry a 12,000 lb (5,443 kg) lifting capacity and run on a hydraulic, 220V single-phase power unit, with overall dimensions of roughly 232-5/8 in (5,910 mm) long (with ramps) and 132-1/8 in (3,356 mm) wide.

Key features

  • 12,000 lb (5,443 kg) capacity - matched to the PRO-12 / PRO-12A platform rating
  • Hydraulic, 220V single-phase power unit - consistent across both configurations
  • Mechanical safety locks with manual release - on the PRO-12 configuration
  • Air-released safety locks plus mechanical locking - on the PRO-12A configuration
  • Alignment-ready (PRO-12A) - rear slip plates and front turnplate cut-outs
  • Overall length ≈232-5/8 in (5,910 mm) with ramps and width ≈132-1/8 in (3,356 mm)

Two configurations

The PRO-12 configuration lists a max lifting height of ≈73-1/2 in (1,867 mm) and a minimum runway height of ≈6-5/8 in (168 mm), while the PRO-12A configuration lists a max lifting height of ≈75-3/8 in (1,915 mm), a minimum runway height of ≈8-5/8 in (220 mm), and adds alignment features. A drive-thru clearance of ≈104-3/16 in (2,646 mm) is specified.

Specification Table
41203 · AMGO HydraulicSKU 41203
Lifting Capacity12,000 lbs (5,443 kg)
Max Lifting Height≈73-1/2 in (1,867 mm)
Minimum Runway Height≈6-5/8 in (168 mm)
Overall Length (with ramps)≈232-5/8 in (5,910 mm)
Overall Width≈132-1/8 in (3,356 mm)
Drive-Thru Clearance≈104-3/16 in (2,646 mm)
Safety SystemMechanical Safety Locks with Manual Release
Power UnitHydraulic, 220V Single Phase
Lifting Capacity12,000 lbs (5,443 kg)
Max Lifting Height≈75-3/8 in (1,915 mm)
Minimum Runway Height≈8-5/8 in (220 mm)
Overall Length (with ramps)≈232-5/8 in (5,910 mm)
Overall Width≈132-1/8 in (3,356 mm)
Alignment FeaturesRear Slip Plates & Front Turnplate Cut-outs
Safety SystemAir-Released Safety Locks + Mechanical Locking
Power UnitHydraulic, 220V Single Phase
FAQ about this model

What lifts does the 41203 extension platform fit?
It is designed for the AMGO PRO-12 and PRO-12A four-post lifts. It is sold each (individually).

What is the lifting capacity?
Both the PRO-12 and PRO-12A configurations are rated at 12,000 lbs (5,443 kg).

What power supply does it require?
It uses a hydraulic power unit running on 220V single phase.

How do the PRO-12 and PRO-12A safety systems differ?
The PRO-12 configuration uses mechanical safety locks with manual release, while the PRO-12A configuration uses air-released safety locks plus mechanical locking.

Does this platform support wheel alignment work?
The PRO-12A configuration includes alignment features — rear slip plates and front turnplate cut-outs. These alignment features are not listed for the PRO-12 configuration.

Warranty
Authorized AMGO Dealer
Full Manufacturer Warranty Included

Vovlift is a factory-authorized AMGO Hydraulics dealer. Every lift ships brand-new with the complete AMGO manufacturer warranty and US-based support — so you are covered from day one.

5 Years
Structural Parts
3 Years
Hydraulic Parts
2 Years
Other & Electrical

*Manufacturer warranty applies to the 48 contiguous states; consumption parts (e.g. rubber pads) excluded. For areas outside the 48 states, contact AMGO Hydraulic Corporation.

Documents
Shipping, Returns & Ordering

Shipping

We offer standard 1-5 business day shipping (following dispatch) via LTL Freight, FedEx, UPS, DHL, or USPS. Orders typically process in 1-2 business days (starting the following business day). Shipping rates are usually calculated at checkout; however, we reserve the right to provide custom shipping quotes for oversized or specialized equipment.

60-DAY NO-HASSLE REFUNDS AND RETURNS

If there’s an issue with your product, we make refunds and returns quick and easy.
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused or unused, with tags, and in its original packaging. To contact us, email info@vovlift.com

More information on shipping and returns can be found here.

Payment & Ordering

Which payment methods do you accept?
We are committed to ensuring a safe, secure shopping experience and place the highest value on your privacy. We accept all major credit cards and payments via Visa, Mastercard, American Express, Discover, Diners Club, Shop Pay, Apple Pay, Google Pay, Meta Pay, and PayPal.

How do I place an order?
Simply click “Add To Cart” on your preferred product and proceed to checkout. Enter your shipping and billing information and complete checkout.

How will I know when my order ships?
Once your order is placed you will receive a confirmation email. When it leaves the warehouse you will receive a second email confirming shipment with a tracking number. If an item goes out of stock, we will notify you via email or phone within one business day.

Will I get an order confirmation by e-mail?
Yes — an order confirmation is sent to the e-mail address you provide for every order. We recommend saving it for your records, so please be sure to enter your e-mail correctly.

Can I change my order?
Yes, you can change your order at no cost — just email us at info@vovlift.com.

Superior lifting solutions

Nearly three decades of engineering precision. AMGO lifts combine high-strength steel with patented safety systems — from 2- and 4-post lifts to specialized scissor systems, proven in real-world garage environments.
Shop AMGO products
AMGO 2-post car lift

27 years of experience

In hydraulics since 1999 — every product is a time-tested solution.

  • Industry leadership for 27 years
  • Proven reliability since 1999
  • Hydraulic engineering expertise

Heavy-duty construction

Reinforced steel components — a rock-solid foundation for any shop.

  • Industrial-grade reinforced steel
  • Maximum capacity & stability
  • Built for long-term performance

Fit to your machine

Adapters and configurations for everything from sports cars to heavy-duty trucks.

  • Versatile lifting adapters
  • Adaptable to various wheelbases
  • Customizable accessory options

Precision engineered

Patented safety locks and synchronized hydraulics — level lifting every time.

  • Patented safety lock systems
  • Smooth synchronized hydraulics
  • Advanced mechanical accuracy
Request a CallbackMon–Fri 10–6 ET