How much can a manual pallet jack lift?

Vovlift's manual pallet jacks range from 4,400 lb to 6,600 lb capacity. Common models include the 4,400 lb EOSLift M20L, 5,500 lb EKKO A25 and GNT G55S, and the 6,600 lb EOSLift M30. Each product page lists the exact rated capacity and fork dimensions.

Can I replace the wheels on my manual pallet jack?

Yes. Vovlift carries EOSLift replacement parts including the EOS08 and EOS07 load wheel sets, the EOS09 steering wheel set, the EOS10 combined load and steering set, and the EOS11 8-piece ball bearing set to keep existing jacks operating.

Do manual pallet jacks need any power or charging?

No. Manual pallet jacks run entirely on a hydraulic hand pump, so there's no battery, charger, or electrical setup required. You pump the handle to raise the forks and push or pull the unit by hand, which eliminates charging downtime for short-distance moves on level floors.

Professional Manual Pallet Jacks for Durable and Versatile Material Handling | Vovlift

Q: What is the difference between a steel and stainless steel pallet jack?

Steel jacks are the standard, lower-cost choice for dry warehouse and dock use. Stainless-steel models like the EKKO A25S, GNT G55S, and EOSLift M20S resist corrosion, making them suited to food processing, cold storage, chemical, and washdown areas where painted steel would rust.

Manual pallet jacks move palletized loads across your dock and warehouse floor without power, batteries, or charging downtime. Vovlift stocks steel and stainless-steel models from EOSLift, EKKO, GNT, and Ballymore with capacities from 4,400 to 6,600 lb, plus replacement load wheels, steering wheels, and bearings to keep existing units running.

✓ Capacities to 6,600 lb · ✓ Steel & stainless options · ✓ Full spec sheet on every listing · ✓ Manufacturer warranty & insured LTL freight · ✓ Sizing help: +1 (307) 441-5529

Sort by

View as

EKKO A25S pallet truck with steel forks and ergonomic handle for easy material handling

EKKO A25S | Stainless Steel Manual Pallet Jack | 5500lbs

$101.90 Off Limited time deal

$2,038.00

$2,038.00 - $2,038.00

$2,038.00

$1,936.10

$1,936.10 - $1,936.10

$1,936.10

Available to order

Buy Now, Pay Later

Exploring the EKKO A25S Manual Pallet Jack Features: High Capacity: Up to 5,500 lbs for heavy duty material handling. Stainless Steel: Fully ma...

View full details

$2,038.00

$2,038.00 - $2,038.00

$2,038.00

$1,936.10

$1,936.10 - $1,936.10

$1,936.10

$101.90 Off Limited time deal

EKKO A25 yellow pallet jack with black handle and red wheels for heavy lifting

EKKO A25 | Manual Pallet Jack | 5500 lbs Capacity | Raised Height 7.5''

$22 Off Limited time deal

$440.00

$440.00 - $440.00

$440.00

$418.00

$418.00 - $418.00

$418.00

Available to order

Buy Now, Pay Later

EKKO A25 Manual Pallet Jack | 5500 lbs Capacity | Raised Height 7.5" Features Durable Construction: Made of a heavy-duty steel frame with precisi...

View full details

$440.00

$440.00 - $440.00

$440.00

$418.00

$418.00 - $418.00

$418.00

$22 Off Limited time deal

Top Picks

Eoslift M20L Manual Pallet Jack – 4,400 lb

Steel 4,400 lb jack for everyday warehouse and dock moves.

$795.00

Eoslift M30 Manual Pallet Jack – 6,600 lb, 7.5" Fork Height

Highest manual capacity at 6,600 lb for heavy pallets.

$632.72

EKKO A25S | Stainless Steel Manual Pallet Jack | 5500lbs

Stainless 5,500 lb jack for food, cold storage, and washdown.

$1,936.10

G55 Manual Pallet Jack

Budget steel jack for light-duty and occasional use.

$393.30

Eoslift E20MP Manual Pallet Jack with Scale – 4,400 lb, 7.9" Lift Height

Manual jack with built-in scale for weighing while you move.

$2,929.09

How to Choose a Manual Pallet Jack

What is a manual pallet jack?

A manual pallet jack is a hydraulic hand truck that lifts and moves palletized loads across level floors. You pump the handle to raise the forks, then push or pull the unit by hand. It needs no battery or charger, making it a low-cost option for short moves in warehouses and docks.

What capacity do you need?

Match the jack to your heaviest routine load. Vovlift's manual models range from 4,400 lb units like the EOSLift M20L to 6,600 lb on the EOSLift M30. Choose a capacity above your typical pallet weight so the hydraulics aren't run at their limit on every lift.

Do you need steel or stainless steel?

Standard steel jacks suit dry warehouse and general dock work. Stainless-steel models such as the EKKO A25S, GNT G55S, and EOSLift M20S resist corrosion in food processing, cold storage, chemical, and washdown environments where painted steel would rust.

What about fork length and width?

Fork dimensions determine which pallets a jack fits. Check the fork length and overall width on each product's spec table against your standard pallet size before ordering, and confirm lowered fork height clears your pallet openings.